How to check the PCV valve for the Honda Prelude?

You can check PCV lines for any leaks or restrictions. To see if the valve is working properly, warm up the engine first and squeeze the hose between the PCV valve and intake manifold. If it does not make a clicking noise, remove it and shake it. Replace it if it doesn't make any rattling or movement. In case of noise, examine grommet as well as hoses for air leaks or damaged parts which must be replaced. Check once more to ensure that the PCV valve operates correctly.

What is the purpose of the Positive Crankcase Ventilation (PCV) valve for the Honda Prelude?

In Honda Accord and Prelude models, the Positive Crankcase Ventilation (PCV) valve plays an important role in protecting the environment by re-routing destructive engine gases into the combustion chamber for incineration. It is of utmost importance in running the engine well and should be done every 60,000 miles or five years on a 2.2L engine model of a 1996 automobile. Clean the valve located on top of intake manifold before removing it then check if there are any loose or deteriorated lines. To reinstall, spread some oil over the mounting grommet and push the valve into it, do not forget to reconnect the vacuum line.

Genuine Honda Prelude PCV Valve

Position Crank Ventilation Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 PCV Valves found

View related parts
Honda Prelude Valve Assembly, Pcv
Part Number: 17130-PH1-003
$17.79 MSRP: $34.41
You Save: $16.62 (49%)
ADD TO CART
Product Specifications
- Other Name: Pcv Valve
- Replaces: 17130-P07-S01, 17130-PC6-003
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1983-1987 Honda Prelude | 2 Door DX, 2 Door SI | KA 4AT, KA 5MT, KH 4AT, KH 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Valve Assembly, Pcv
Part Number: 17130-PK1-003
$32.11 MSRP: $45.35
You Save: $13.24 (30%)
ADD TO CART
Product Specifications
- Other Name: Pcv Valve; Valve
- Replaces: 17130-PR4-Y01, 17130-P0A-003
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1988-2001 Honda Prelude | 2 Door 2.05SI, 2 Door 2.0S, 2 Door 2.0SI, 2 Door Base, 2 Door S, 2 Door SI, 2 Door Sivtec, 2 Door TYPESH | KA 4AT, KA 5MT, KL 4AT, KL 5MT

Honda Prelude PCV Valve

The PCV Valve in Honda Prelude vehicles can be rated as one of the essential parts affecting emissions and performance of the vehicle's engine. PCV valve helps for a proper functioning of the engine and also checks the emission of bad gases by circulation of these crankcase combustion byproduct gases back into the combustion chambers. The function of this valve depends on the intake manifold vacuum condition and works in order to open or close as it follows blow-by gases in order not to harm the engine. Maintenance of the PCV Valve is also required so that there are no complications such as, oil leaks, high fuel rate, sludge deposits and may cause so much of expenses to be incurred. In conclusion, it is clear that PCV Valve has a very important function in the preservation of the efficiency of an engine and preservation of the environment.

In search of affordable OEM Honda Prelude PCV Valve? Consider browsing through our extensive inventory of genuine Honda Prelude PCV Valve. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Prelude PCV Valve Parts Questions & Experts Answers

Valve Assembly, Pcv
17130-PK1-003
Q: How to check the PCV valve for the Honda Prelude?
A: You can check PCV lines for any leaks or restrictions. To see if the valve is working properly, warm up the engine first and squeeze the hose between the PCV valve and intake manifold. If it does not make a clicking noise, remove it and shake it. Replace it if it doesn't make any rattling or movement. In case of noise, examine grommet as well as hoses for air leaks or damaged parts which must be replaced. Check once more to ensure that the PCV valve operates correctly.
Valve Assembly, Pcv
17130-PK1-003
Q: What is the purpose of the Positive Crankcase Ventilation (PCV) valve for the Honda Prelude?
A: In Honda Accord and Prelude models, the Positive Crankcase Ventilation (PCV) valve plays an important role in protecting the environment by re-routing destructive engine gases into the combustion chamber for incineration. It is of utmost importance in running the engine well and should be done every 60,000 miles or five years on a 2.2L engine model of a 1996 automobile. Clean the valve located on top of intake manifold before removing it then check if there are any loose or deteriorated lines. To reinstall, spread some oil over the mounting grommet and push the valve into it, do not forget to reconnect the vacuum line.