How do you replace the Intake Manifold Temperature Sensor and Mass Air Flow Sensor on Honda Fit?

In the models produced in 2007 and 2008 the Intake Manifold Temperature Sensor is fixed on the back of the air filter housing. First, you need to unscrew the electrical connector from the Intake Manifold Temperature Sensor and then take out the sensor from the grommet that is averagely fixed in the air filter housing. Examine the grommet material for signs of cracking or wearing down, and if such is the case replace it, the installation is a process that will just be a reverse of removal. For the vehicles that have been produced after 2009, the MAF/Intake Manifold Temperature Sensor is fitted on the upper part of the air filter housing. The first step is to remove the electrical connector of MAF/Intake Manifold Temperature Sensor with the help of a snap. The second step includes the removal of two screws-the sensor is mounted on the air filter housing. Eliminate any signs of wear on the MAF/Intake Manifold Temperature Sensor gasket, and if so perform replacement and ensure installation is done in a reverse manner and make sure to use new gasket securing the screws tightly.

Genuine Honda Fit Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Intake Manifold Temperature Sensors found

View related parts
Honda Fit Sensor Assembly, Air Temperature (Matsushita Denshi)
Part Number: 37880-PLC-004
$47.93 MSRP: $67.70
You Save: $19.77 (30%)
ADD TO CART
Product Specifications
- Other Name: Air Intake Temp Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2007-2008 Honda Fit | 5 Door Base, 5 Door Sport | KA 5AT, KA 5MT
View related parts
Honda Fit Sensor, Air Temp
Part Number: 37880-RWC-A01
$61.81 MSRP: $87.30
You Save: $25.49 (30%)
ADD TO CART
Product Specifications
- Other Name: Air Intake Temp Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2015-2020 Honda Fit | 5 Door EX, 5 Door EX-L, 5 Door EX-LN, 5 Door LX, 5 Door LX SE, 5 Door Sport | KA 6MT, KA CVT

Honda Fit Intake Manifold Temperature Sensor

The Intake Manifold Temperature Sensor is significant in the Honda Fit Vehicles in that it assesses the temperature of air that is to be admitted for combustion in the vehicle's engine. This information is then transmitted to the Powertrain Control Module (PCM), that in turn changes the pulse duration of the fuel injector so as to enable the correct air/fuel mixture as determined by the Operating Condition Sensor. For the Intake Manifold Temperature Sensors, Honda Fit of the past years has been applying various kinds of Intake Air Temperature Control, namely, Mass Air Flow (MAF) sensors as well as Velocity Air Flow (VAF) sensors. Any given type of the device is tuned to operate within certain airflow parameters and is compatible with certain fuel injectors. These sensors can also vary in terms of its tolerance to additional airflow, which is usually come across during performance enhancements such as the installation of a bigger throttle body or high flow fuel injectors. It is imperative that the Intake Manifold Temperature Sensor runs optimally since faulty operations may cause stalling or wrong air/fuel ratio.

In search of affordable OEM Honda Fit Intake Manifold Temperature Sensor? Consider browsing through our extensive inventory of genuine Honda Fit Intake Manifold Temperature Sensor. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Fit Intake Manifold Temperature Sensor Parts Questions & Experts Answers

Sensor Assembly, Air Temperature (Matsushita Denshi)
37880-PLC-004
Q: How do you replace the Intake Manifold Temperature Sensor and Mass Air Flow Sensor on Honda Fit?
A: In the models produced in 2007 and 2008 the Intake Manifold Temperature Sensor is fixed on the back of the air filter housing. First, you need to unscrew the electrical connector from the Intake Manifold Temperature Sensor and then take out the sensor from the grommet that is averagely fixed in the air filter housing. Examine the grommet material for signs of cracking or wearing down, and if such is the case replace it, the installation is a process that will just be a reverse of removal. For the vehicles that have been produced after 2009, the MAF/Intake Manifold Temperature Sensor is fitted on the upper part of the air filter housing. The first step is to remove the electrical connector of MAF/Intake Manifold Temperature Sensor with the help of a snap. The second step includes the removal of two screws-the sensor is mounted on the air filter housing. Eliminate any signs of wear on the MAF/Intake Manifold Temperature Sensor gasket, and if so perform replacement and ensure installation is done in a reverse manner and make sure to use new gasket securing the screws tightly.