Where is the MAP sensor located and How to remove and install on Honda Fit?

The MAP sensor is usually fitted atop of the intake manifold towards the driver-side of the engine. First of all, the electrical connector of the MAP sensor must be disconnected. Third, bring out the mounting screw and withdraw the sensor as well from the device. Regarding installation the process should be the inverse of the removal process and as always, a new O-ring should be used and the mounting screw should be tightened to the required amount.

Genuine Honda Fit MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
Honda Fit Sensor Assembly, Map
Part Number: 37830-RNA-A01
$59.31 MSRP: $83.77
You Save: $24.46 (30%)
ADD TO CART
Product Specifications
- Other Name: M.A.P. Sensor; Map Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2015-2020 Honda Fit | 5 Door EX, 5 Door EX-L, 5 Door EX-LN, 5 Door LX, 5 Door LX SE, 5 Door Sport | KA 6MT, KA CVT
- 2009-2013 Honda Fit | 5 Door FIT, 5 Door Sport | KA 5AT, KA 5MT
View related parts
Honda Fit Sensor Assembly, Map
Part Number: 37830-PNC-003
$85.73 MSRP: $121.09
You Save: $35.36 (30%)
ADD TO CART
Product Specifications
- Other Name: M.A.P. Sensor; Map Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2007-2008 Honda Fit | 5 Door Base, 5 Door Sport | KA 5AT, KA 5MT

Honda Fit MAP Sensor

The MAP Sensor in Honda Fit automobiles is an important element that actually measures or detects the positive air pressure which is actually getting into the intake manifold. This small device sends data to the engine control unit (ECU) to allow it to control the fuel injectors so as to alter the air-fuel mixture ratio and improve combustion. The Honda Fit uses the MAP Sensor mainly in naturally aspirated engines where it used with the mass airflow (MAF) sensor and the forced induction engines use both. There could be differences of the MAP Sensors depending on the different models of Honda Fit with the only major difference being whether it will be used in naturally aspirated or induced systems. Due to its capability to give the pressure information at real time, MAP Sensor plays an important role in the fuel metering, ignition timing and other associated functions of the Honda Fit's electronic control system.

In search of affordable OEM Honda Fit MAP Sensor? Consider browsing through our extensive inventory of genuine Honda Fit MAP Sensor. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Fit MAP Sensor Parts Questions & Experts Answers

Sensor Assembly, Map
37830-PNC-003
Q: Where is the MAP sensor located and How to remove and install on Honda Fit?
A: The MAP sensor is usually fitted atop of the intake manifold towards the driver-side of the engine. First of all, the electrical connector of the MAP sensor must be disconnected. Third, bring out the mounting screw and withdraw the sensor as well from the device. Regarding installation the process should be the inverse of the removal process and as always, a new O-ring should be used and the mounting screw should be tightened to the required amount.