Genuine Honda Prelude Windshield Wiper

Honda Prelude Windshield Wiper Parts Questions & Answers

• Rubber (475MM)
  38472-SB3-305
  Q: How do I Remove the Windshield Wiper Blade,Washer Pump and Arm on Honda Prelude?

  A: To remove the windshield wiper blade and arm, remove the mounting nut from the wiper pivot, press down on the arm, and fold it up. For the rear wiper arm, use a 12mm wrench. To remove the wiper motor, make sure the wipers are in the park position, remove the arms, clips, and trim covers, then use a 10mm socket to remove the four mounting bolts. To remove the washer pump, remove the bumper or fender well, disconnect the motor and fluid hose, and release the pump from the bottle and grommet. To reinstall, switch the removal steps going from the final step to the first step.
• Rubber (475MM)
  38472-SB3-305
  Q: How to replace Windshield Wiper for the Honda Prelude?

  A: To replace a Lexor wiper blade refill, remove the old insert and slide in a new one. For Pylon and Trico blades, remove the end clip or tab before removing the insert, and replace after installing the new one. Tripledge blades use a securing clip. Maintain effectiveness by cleaning the windshield and blades monthly with a commercial glass cleaner and wet rag. Avoid manually moving wipers to prevent damage. Inspect and replace wiper blade elements in the LOW speed and ACC ignition positions. Replace immediately if cracks or tears are found. Element life is typically one year due to ozone deterioration. Replace in pairs if the wiper pattern is smeared or streaked. Follow manufacturer's instructions when replacing refills with different types like Anco, Trico, or polycarbonate.