Honda 76632-S30-003 Rubber, Blade (475MM)

You can Select Your Vehicle to check if 76632-S30-003 fits your vehicle.

Verify the wiper switch operation to ensure it properly interrupts power to the wiper motor. If the switch is functioning correctly, the wiper motor parking circuit may have failed, necessitating a replacement of the wiper motor assembly.

For Trico wiper blades, turn up the tab at the end of the blade, then remove the insert. After installing the replacement insert, bend the tab back.

Make sure the wipers are in the park position, remove the wiper arms from the wiper pivots, remove the upper and lower clips from the plastic windshield wiper linkage cover, remove the 2 wiper pivot trim covers, and then remove the plastic wiper linkage cover. Using a 10mm socket, extension and ratchet, remove the four wiper assembly mounting bolts, remove the wiper motor electrical connector from the wiper motor, and carefully remove the wiper motor and linkage assembly from the center cowling.