How do you remove and install the transaxle and crankshaft rear main seal on Honda Prelude?

Driveplate should be detached from the crankshaft then, to get to the crankshaft rear crankshaft seal, it has to be teased out of its retainer. For installation clean engine oil should first be applied to the lip of the new seal, the seal should then be placed onto the crankshaft and into the retainer with the help of the seal driver, after which the driveplate and the transaxle should be replaced.

Genuine Honda Prelude Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Crankshaft Seals found

View related parts
Honda Prelude Oil Seal (80X100X10) (Nok)
Part Number: 91214-PLE-003
$28.18 MSRP: $39.80
You Save: $11.62 (30%)
ADD TO CART
Product Specifications
- Other Name: Rear Main Seal
- Replaces: 91214-PH1-013, 91214-P2F-A01, 91214-PAA-A01, 91214-PH1-661, 91214-PLM-A01, 91214-PC7-003, 91214-PC6-003, 91214-PC6-013, 91214-PH3-751, 91214-P7A-004, 91214-PE1-721, 91214-PLC-003, 91214-PT0-004, 91214-PAA-A02, 91214-PD2-004, 91214-PLM-A02, 91214-PR4-A01, 91214-PLC-004, 91214-PH1-003, 91214-PH1-004
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1983-2001 Honda Prelude | 2 Door 2.05SI, 2 Door 2.0S, 2 Door 2.0SI, 2 Door Base, 2 Door DX, 2 Door S, 2 Door SI, 2 Door Sivtec, 2 Door TYPESH | KA 4AT, KA 5MT, KH 4AT, KH 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Oil Seal (40X52X7) (Arai)
Part Number: 91212-P0A-004
$13.41 MSRP: $19.11
You Save: $5.70 (30%)
ADD TO CART
Product Specifications
- Other Name: Oil Seal
- Replaces: 91212-PT0-003
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1992-1997 Honda Prelude | 2 Door Base, 2 Door S, 2 Door SI, 2 Door Sivtec, 2 Door TYPESH | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Oil Seal (40X52X7) (Nok)
Part Number: 91212-PAA-A01
$13.66 MSRP: $19.30
You Save: $5.64 (30%)
ADD TO CART
Product Specifications
- Other Name: Front Crank Seal
- Replaces: 91212-PAA-A02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1998-2001 Honda Prelude | 2 Door Base, 2 Door TYPESH | KA 4AT, KA 5MT
View related parts
Honda Prelude Oil Seal (80X100X10) (Arai)
Part Number: 91214-P7A-004
$28.18 MSRP: $39.80
You Save: $11.62 (30%)
ADD TO CART
Product Specifications
- Other Name: Rear Main Seal
- Replaced by: 91214-PLE-003
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1997-2000 Honda Prelude | 2 Door Base, 2 Door TYPESH | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Oil Seal (80X100X10) (Nok)
Part Number: 91214-PAA-A01
$28.18 MSRP: $39.80
You Save: $11.62 (30%)
ADD TO CART
Product Specifications
- Other Name: Rear Main Seal
- Replaced by: 91214-PLE-003
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1997-2000 Honda Prelude | 2 Door Base, 2 Door TYPESH | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Oil Seal (80X100X10) (Arai)
Part Number: 91214-PH3-751
$28.18 MSRP: $39.80
You Save: $11.62 (30%)
ADD TO CART
Product Specifications
- Replaced by: 91214-PLE-003
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1989-1996 Honda Prelude | 2 Door 2.05SI, 2 Door 2.0S, 2 Door 2.0SI, 2 Door S, 2 Door SI, 2 Door Sivtec | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Oil Seal (35X54X8) (Nok)
Part Number: 91212-PH1-661
Product Specifications
- Other Name: Front Crank Seal
- Replaces: 91212-PH1-004, 91212-PH1-003, 91212-PH1-013, 91212-PC6-003, 91212-PD2-004
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1983-1987 Honda Prelude | 2 Door DX, 2 Door SI | KA 4AT, KA 5MT, KH 4AT, KH 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Oil Seal (35X50X8)
Part Number: 91212-611-003
Product Specifications
- Replaces: 91212-611-010, 91212-PA5-004
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1979-1982 Honda Prelude | 2 Door ** | KA 5MT, KA HMT, KH 5MT, KH HMT, KL 5MT, KL HMT
View related parts
Honda Prelude Oil Seal (38X53X7)
Part Number: 91212-PJ5-013
Product Specifications
- Other Name: Front Crank Seal
- Replaces: 91212-PJ5-003, 91212-PH3-751
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1988-1991 Honda Prelude | 2 Door 2.05SI, 2 Door 2.0S, 2 Door 2.0SI | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Oil Seal (74X98X12)
Part Number: 91214-634-004
Product Specifications
- Replaces: 91214-634-003, 91214-PA5-004
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1979-1980 Honda Prelude | 2 Door ** | KA 5MT, KA HMT, KH 5MT, KH HMT, KL 5MT, KL HMT
View related parts
Honda Prelude Oil Seal (35X54X8)
Part Number: 91212-PC6-003
Product Specifications
- Replaced by: 91212-PH1-661
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1983-1985 Honda Prelude | 2 Door DX | KA 4AT, KA 5MT, KH 4AT, KH 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Oil Seal (76X98X12)
Part Number: 91214-PB2-003
Product Specifications
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1980-1982 Honda Prelude | 2 Door ** | KA 5MT, KA HMT, KH 5MT, KH HMT, KL 5MT, KL HMT

Honda Prelude Crankshaft Seal Parts Questions & Experts Answers

Oil Seal (40X52X7) (Nok)
91212-PAA-A01
Q: How do you remove and install the transaxle and crankshaft rear main seal on Honda Prelude?
A: Driveplate should be detached from the crankshaft then, to get to the crankshaft rear crankshaft seal, it has to be teased out of its retainer. For installation clean engine oil should first be applied to the lip of the new seal, the seal should then be placed onto the crankshaft and into the retainer with the help of the seal driver, after which the driveplate and the transaxle should be replaced.