How do you remove and install the brake booster on Honda Prelude?

To remove and install the brake booster, first disconnect the negative battery cable. Detach all electrical connectors from the master cylinder and remove the brake fluid, then use a flare nut wrench to disconnect the metal fluid lines. Next, remove the master cylinder from the brake booster and disconnect the vacuum hoses from the brake booster. From inside the passenger compartment, under the dash, remove the clevis and its pin from the brake pedal, followed by the removal of the booster mounting bolts. Take out the brake booster from the engine compartment. For installation, place the power brake booster back in the reverse order of removal, fill the master cylinder with Honda approved or equivalent DOT 3 or DOT 4 brake fluid, and properly bleed the master cylinder.

Genuine Honda Prelude Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Brake Boosters found

View related parts
Honda Prelude Power Assembly, Master
Part Number: 46400-SA5-013
$254.37 MSRP: $362.36
You Save: $107.99 (30%)
ADD TO CART
Product Specifications
- Replaced by: 46400-SA5-023
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1983 Honda Prelude | 2 Door DX | KA 4AT, KA 5MT, KH 4AT, KH 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Power Assembly, Master (9")
Part Number: 46400-SB0-952
$271.45 MSRP: $386.69
You Save: $115.24 (30%)
ADD TO CART
Product Specifications
- Replaced by: 46400-SB0-953
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1984-1987 Honda Prelude | 2 Door DX | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Power Assembly, Master (9")
Part Number: 46400-SE3-033
$277.86 MSRP: $395.82
You Save: $117.96 (30%)
ADD TO CART
Product Specifications
- Replaced by: 46400-SE3-043
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1985-1987 Honda Prelude | 2 Door SI | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Power Assembly, Master (9")
Part Number: 46400-SF1-003
$319.97 MSRP: $455.81
You Save: $135.84 (30%)
ADD TO CART
Product Specifications
- Replaced by: 46400-SF1-023
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1988 Honda Prelude | 2 Door 2.0S, 2 Door 2.0SI | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Power Assembly, Master (9")
Part Number: 46400-SF1-013
$319.97 MSRP: $455.81
You Save: $135.84 (30%)
ADD TO CART
Product Specifications
- Replaced by: 46400-SF1-023
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1989 Honda Prelude | 2 Door 2.0S, 2 Door 2.0SI | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Power Set, Master (9")
Part Number: 06464-SE3-020
Product Specifications
- Other Name: Booster Overhaul Kit
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1988-1991 Honda Prelude | 2 Door 2.05SI, 2 Door 2.0S, 2 Door 2.0SI | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Power Set, Master (9")
Part Number: 06464-SE3-010
Product Specifications
- Other Name: Booster Overhaul Kit
- Replaces: 06464-SE3-000
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1985-1988 Honda Prelude | 2 Door 2.0S, 2 Door 2.0SI, 2 Door SI | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Power Set, Master (9")
Part Number: 06464-SA5-950
Product Specifications
- Other Name: Booster Overhaul Kit
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1984-1987 Honda Prelude | 2 Door DX | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Power Assembly, Master
Part Number: 46400-692-013
Product Specifications
- Replaces: 46400-692-003
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1979-1982 Honda Prelude | 2 Door ** | KA 5MT, KA HMT, KH 5MT, KH HMT, KL 5MT, KL HMT
View related parts
Honda Prelude Power Assembly, Master (9")
Part Number: 46400-SF1-023
Product Specifications
- Other Name: Brake Booster
- Replaces: 46400-SF1-003, 46400-SF1-013
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1988-1991 Honda Prelude | 2 Door 2.05SI, 2 Door 2.0S, 2 Door 2.0SI | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Power Assembly, Master (7"+8")
Part Number: 46400-SM5-A01
Product Specifications
- Other Name: Brake Booster
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1992-1996 Honda Prelude | 2 Door S | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Power Assembly, Master (8"+9")
Part Number: 46400-SS0-A51
Product Specifications
- Other Name: Brake Booster
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1992-1996 Honda Prelude | 2 Door SI, 2 Door Sivtec | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Power Assembly, Master (8"+9")
Part Number: 46400-S30-A52
Product Specifications
- Other Name: Brake Booster
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1997-2001 Honda Prelude | 2 Door Base, 2 Door TYPESH | KA 4AT, KA 5MT, KL 4AT, KL 5MT

Honda Prelude Brake Booster Parts Questions & Experts Answers

Power Assembly, Master (8"+9")
46400-S30-A52
Q: How do you remove and install the brake booster on Honda Prelude?
A: To remove and install the brake booster, first disconnect the negative battery cable. Detach all electrical connectors from the master cylinder and remove the brake fluid, then use a flare nut wrench to disconnect the metal fluid lines. Next, remove the master cylinder from the brake booster and disconnect the vacuum hoses from the brake booster. From inside the passenger compartment, under the dash, remove the clevis and its pin from the brake pedal, followed by the removal of the booster mounting bolts. Take out the brake booster from the engine compartment. For installation, place the power brake booster back in the reverse order of removal, fill the master cylinder with Honda approved or equivalent DOT 3 or DOT 4 brake fluid, and properly bleed the master cylinder.