Where is the knock sensor located and how do you remove it for the Honda Pilot?

On the top of the engine block, beneath the intake manifold is where the knock sensor is located. Firstly, get rid of both upper and lower intake manifolds so that you can remove it. Then, take out the fuel rail assembly. Finally, unplug the electric connector from the knock sensor and remove it. In reverse order to remove it. Be careful to replace it with a fresh 0-ring and screw in tight the knock sensor.

Genuine Honda Pilot Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Knock Sensors found

View related parts
Honda Pilot Sensor, Knock
Part Number: 30530-R1A-A01
$129.03 MSRP: $183.81
You Save: $54.78 (30%)
ADD TO CART
Product Specifications
- Other Name: Knock Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2016-2024 Honda Pilot | 5 Door Black (AWD), 5 Door ELITE (AWD), 5 Door EX (2WD), 5 Door EX (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door LX (2WD), 5 Door LX (AWD), 5 Door SE (2WD), 5 Door SE (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD), Black Edition, EX-L, Elite, Special Edition, Sport, Touring, TrailSport | KA 6AT, KA 9AT
View related parts
Honda Pilot Sensor Assembly, Knock
Part Number: 30530-P8F-A01
$53.40 MSRP: $75.42
You Save: $22.02 (30%)
ADD TO CART
Product Specifications
- Other Name: Knock Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2003-2008 Honda Pilot | 5 Door EX, 5 Door EX (2WD), 5 Door EX (4WD), 5 Door EX-L, 5 Door EX-L (2WD), 5 Door EX-L (4WD), 5 Door EX-SE (2WD), 5 Door EX-SE (4WD), 5 Door LX, 5 Door LX (2WD), 5 Door LX (4WD), 5 Door LX-VP (2WD), 5 Door LX-VP (4WD) | KA 5AT, KL 5AT
View related parts
Honda Pilot Sensor, Knock
Part Number: 30530-RNA-A01
$32.65 MSRP: $46.12
You Save: $13.47 (30%)
ADD TO CART
Product Specifications
- Other Name: Knock Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2009-2015 Honda Pilot | 5 Door EX (2WD), 5 Door EX (4WD), 5 Door EX 4.4 (4WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door LX 4.2 (4WD), 5 Door SE (2WD), 5 Door SE (4WD), 5 Door Touring (2WD), 5 Door Touring (4WD) | KA 5AT

Honda Pilot Knock Sensor

The Knock Sensor in Honda Pilot vehicles is one of the vehicle's most vital systems since it is responsible for detecting the presence of engine knock and sending signals to the PCM to allow for proper timing adjustment. For the most part, piezoelectric the sensor transduces the diaphragm motion, in this case vibrating at pressure peak, knock, into electrical form. The Knock Sensor being able to control ignition timing as much as possible, the engine performance is optimized and rarely damaged despite the use of low octane fuels. High-end systems can control boostpressure and also alter the timing of the cylinder to achieve the premier performance and durability under some conditions. Speaking of Engine Management technology, Knock Sensor technology of Honda Pilot is a good example of the new generation.

In search of affordable OEM Honda Pilot Knock Sensor? Consider browsing through our extensive inventory of genuine Honda Pilot Knock Sensor. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Pilot Knock Sensor Parts Questions & Experts Answers

Sensor Assembly, Knock
30530-P8F-A01
Q: Where is the knock sensor located and how do you remove it for the Honda Pilot?
A: On the top of the engine block, beneath the intake manifold is where the knock sensor is located. Firstly, get rid of both upper and lower intake manifolds so that you can remove it. Then, take out the fuel rail assembly. Finally, unplug the electric connector from the knock sensor and remove it. In reverse order to remove it. Be careful to replace it with a fresh 0-ring and screw in tight the knock sensor.