How do you remove and install the Transmission Range switch on Honda Fit?

To remove the Transmission Range switch, first raise the vehicle and support it securely on jackstands, then shift the transmission into the neutral position. Next, remove the TR switch cover by taking out the bolts, and disconnect the electrical connector from the TR switch. After that, remove the two mounting bolts to take out the TR switch. For installation and adjustment, set the parking brake and ensure the shift selector is in the neutral position. Align the cutouts on the hub of the switch with those on the switch body, using a 0.08 inch (2.0 mm) feeler gauge blade or equivalent to hold the switch in the neutral position. Install the TR switch on the selector control shaft while keeping the feeler gauge blade or drill bit in place, then tighten the TR switch bolts to the specified torque. Finally, verify that the engine starts only in Park or Neutral and that the back-up lights activate only in Reverse, making any necessary adjustments to the range switch, and secure the switch cover by tightening the bolts.

Genuine Honda Fit Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Neutral Safety Switches found

View related parts
Honda Fit Sensor, Position
Part Number: 28900-R9L-004
$131.81 MSRP: $192.70
You Save: $60.89 (32%)
ADD TO CART
Product Specifications
- Other Name: Range Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2015-2020 Honda Fit | 5 Door EX, 5 Door EX-L, 5 Door EX-LN, 5 Door LX, 5 Door LX SE, 5 Door Sport | KA CVT
View related parts
Honda Fit Sensor Assembly, Position
Part Number: 28900-RPC-013
$161.32 MSRP: $235.85
You Save: $74.53 (32%)
ADD TO CART
Product Specifications
- Other Name: Neutral Safety Switch; Range Sensor
- Replaces: 28900-PPV-023, 28900-RCR-013, 28900-PPV-003, 28900-PPV-013, 28900-RCR-003, 28900-RCL-003, 28900-RPC-003, 28900-PRP-003
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2007-2008 Honda Fit | 5 Door Base, 5 Door Sport | KA 5AT
View related parts
Honda Fit Sensor Assembly, Position
Part Number: 28900-RPC-003
$161.32 MSRP: $235.85
You Save: $74.53 (32%)
ADD TO CART
Product Specifications
- Other Name: Neutral Safety Switch; Range Sensor
- Replaced by: 28900-RPC-013
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2007-2008 Honda Fit | 5 Door Base, 5 Door Sport | KA 5AT
View related parts
Honda Fit Sensor Assembly, Position
Part Number: 28900-RCT-024
$160.78 MSRP: $229.03
You Save: $68.25 (30%)
ADD TO CART
Product Specifications
- Other Name: Range Sensor
- Replaces: 28900-RCT-014
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2013 Honda Fit | 5 Door FIT, 5 Door Sport | KA 5AT
View related parts
Honda Fit Sensor Set, Position
Part Number: 28900-RR4-305
$160.78 MSRP: $229.03
You Save: $68.25 (30%)
Product Specifications
- Other Name: Range Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013 Honda Fit | 5 Door FIT, 5 Door Sport | KA 5AT
- 2009-2010 Honda Fit | 5 Door FIT, 5 Door Sport | KA 5AT

Honda Fit Neutral Safety Switch

The Honda Fit Neutral Safety Switch is what prevents the engine from cranking unless the transmission is in Park or Neutral to prevent sudden movement of the vehicle. Early versions were based on the simple plunger next to the shifter, while later units have a sealed multi-pin sensor on the range selector, but both have the same purpose. In all Honda Fits, the Neutral Safety Switch sends a signal to the starter and ECU to allow it to flow current only when the gear selector is in Park or Neutral. If the Honda Fit Neutral Safety Switch fails, the starter remains silent as a warning for drivers to reseat the shifter rather than attempt a risky jump start. The recent style of Neutral Safety Switch is contactless sensors which are less susceptible to corrosion than the plunger type previously applied, so that no start complaints are reduced in cold climates. Overall, the Neutral Safety Switch is a small part that brings a lot of peace of mind to every Honda Fit driver.

In search of affordable OEM Honda Fit Neutral Safety Switch? Consider browsing through our extensive inventory of genuine Honda Fit Neutral Safety Switch. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Fit Neutral Safety Switch Parts Questions & Experts Answers

Sensor Assembly, Position
28900-RPC-013
Q: How do you remove and install the Transmission Range switch on Honda Fit?
A:
To remove the Transmission Range switch, first raise the vehicle and support it securely on jackstands, then shift the transmission into the neutral position. Next, remove the TR switch cover by taking out the bolts, and disconnect the electrical connector from the TR switch. After that, remove the two mounting bolts to take out the TR switch. For installation and adjustment, set the parking brake and ensure the shift selector is in the neutral position. Align the cutouts on the hub of the switch with those on the switch body, using a 0.08 inch (2.0 mm) feeler gauge blade or equivalent to hold the switch in the neutral position. Install the TR switch on the selector control shaft while keeping the feeler gauge blade or drill bit in place, then tighten the TR switch bolts to the specified torque. Finally, verify that the engine starts only in Park or Neutral and that the back-up lights activate only in Reverse, making any necessary adjustments to the range switch, and secure the switch cover by tightening the bolts.