×
- Live Chat
- 1-888-984-2011
My Garage
My Account
Cart
Genuine Honda CRX Turn Signal Switch
Turn Signal Indicator Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
12 Turn Signal Switches found
Honda CRX Switch Assembly, Combination (Tec)
Part Number: 35250-SH3-A22$212.00 MSRP: $302.01You Save: $90.01 (30%)
Honda CRX Turn Signal Switch Parts Questions & Experts Answers
- Q: What components are contained in the switch housing and How to remove and install the turn signal switch on Honda CRX?A: The switch housing contains the wiper, washer, and Headlight Switches, along with the turn signal actuator. For 1984-87 models, begin by removing the steering wheel and disconnecting the column wiring harness and coupler, taking care not to damage the steering column or shaft. Next, remove the upper and lower column covers, and if applicable, the cruise control slip ring. Proceed to remove the turn signal canceling sleeve, then for later models, take out the switch retaining screws and remove the switch. Loosen the screw on the turn signal switch cam nut and lightly tap it to allow the cam nut to loosen, then remove the turn signal switch assembly and the steering shaft upper bushing. To install, reverse the procedure, ensuring that the locating tab on the turn signal switch engages with the notch in the steering column, and install the steering shaft upper bushing with the flat side facing upward. For earlier models, if the cam nut has been removed, install it with the small end facing up.
