×
- Live Chat
- 1-888-984-2011
My Garage
My Account
Cart
Genuine Honda CRX Blower Motor
A/C Heater Blower Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
12 Blower Motors found
Honda CRX Blower Motor
The Blower Motor in Honda CRX vehicles is an important part of the cars' climate control system that helps to blow hot or cool air inside the car. It works in a way that it supplies power to a fan then controls the climate into the vehicle. The Blower Motor is operational through a module which is wired enabling the drivers to regulate the airflow according to their preference. From the above discussion it is evident that a specific year Honda CRX may have incorporated different style of Blower Motors due to change in Climate Control Unit. As for the basic working principle, differences could exist in the number of Blower Motors used, for instance, the product could have a single blower, but others, especially those that are larger in size such as the SUVs, may use more than one blower motor. In particular, special attention should be paid to the regular maintenance and timely replacement of the Blower Motor and its controls to meet the needs of Honda CRX vehicles.
In search of affordable OEM Honda CRX Blower Motor? Consider browsing through our extensive inventory of genuine Honda CRX Blower Motor. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.
Honda CRX Blower Motor Parts Questions & Experts Answers
- Q: How do you remove and install the blower motor on Honda CRX?A: Before removing and installing the blower motor, the negative battery cable must be disconnected and the air conditioning discharge if necessary. Next is the glove box assembly and the frame, then the blower duct on the models without the air conditioning system; it is the white plastic duct between the blower case and the heater case. For models equipped with air conditioning, then the Evaporator assembly must be detached. Remove the wire connectors at the blower motor assembly and then you unscrew the blower motor housing bolts. Remove the blower housing in order to take out the blower motor; it is possible to remove the motor from the blower cage in case of its necessity. For installation position the blower assembly under the instrument panel, bolt and tighten the retaining bolts to 7 ft lbs. (10 Nm) and again join the wires at the blower unit. If installing the air duct, perform the operation and make sure that the foam seals are correctly engaged; then immediately reattach the evaporator housing, glove box assembly, and frame. Last of all, connect the battery cable and then charge the air conditioning unit.
