Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2017-2024 Honda CR-V | 5 Door EX (2WD), 5 Door EX (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door LX (2WD), 5 Door LX (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD), EX, EX-L, Hybrid Sport, Hybrid Sport Touring, Hybrid Sport-L, LX, Special Edition, Touring | KA CVT
Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2010-2019 Honda CR-V | 5 Door EX (2WD), 5 Door EX (4WD), 5 Door EX (AWD), 5 Door EX-L (2WD), 5 Door EX-L (4WD), 5 Door EX-L (AWD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door LX (AWD), 5 Door SE (2WD), 5 Door SE (4WD), 5 Door SE (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD) | KA 5AT, KA CVT
Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2010-2019 Honda CR-V | 5 Door EX (2WD), 5 Door EX (4WD), 5 Door EX (AWD), 5 Door EX-L (2WD), 5 Door EX-L (4WD), 5 Door EX-L (AWD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door LX (AWD), 5 Door SE (2WD), 5 Door SE (4WD), 5 Door SE (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD) | KA 5AT, KA CVT
Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2010-2014 Honda CR-V | 5 Door EX (2WD), 5 Door EX (4WD), 5 Door EX (AWD), 5 Door EX-L (2WD), 5 Door EX-L (4WD), 5 Door EX-L (AWD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door LX (AWD), 5 Door SE (2WD), 5 Door SE (4WD) | KA 5AT
Honda CR-V Mass Air Flow Sensor Parts Questions & Experts Answers
Q: How do I locate and remove the MAF/IAT sensor on the air filter housing of the Honda CR-V?
A: The MAF/Intake Manifold Temperature Sensor is located on the air filter housing. The lid of the air filter housing should be removed in Civic 1.8L models. From the Intake Manifold Temperature Sensor, disconnect the electrical connector. The MAF/Intake Manifold Temperature Sensor and gasket can be removed once unscrewing the sensor mounting screws. Installation must follow removal procedures. A new gasket is also needed.