How to remove and install the knock sensor on the Honda CR-V?

Loosen the right front wheel lug nuts on a Civic 1.8L, then raise the vehicle on jackstands. Remove the right front wheel and splash shield. For 2015 and later CR-V models, remove the front floor undercover. Locate the knock sensor on the engine block. On a Civic 1.8L, remove the intake manifold support bracket. Disconnect the sensor's electrical connector, remove the retaining nut, and the sensor. To install, reverse the removal process and tighten the sensor retaining bolt or nut to the torque.

Genuine Honda CR-V Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Knock Sensors found

View related parts
Honda CR-V Sensor, Knock
Part Number: 30530-PPL-A01
$127.49 MSRP: $181.62
You Save: $54.13 (30%)
ADD TO CART
Product Specifications
- Other Name: Knock Sensor
- Replaces: 30530-PNA-003
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2002-2009 Honda CR-V | 5 Door EX, 5 Door EX (2WD), 5 Door EX (4WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door SE | KA 4AT, KA 5AT, KA 5MT
View related parts
Honda CR-V Sensor, Knock
Part Number: 30530-R1A-A01
$129.03 MSRP: $183.81
You Save: $54.78 (30%)
ADD TO CART
Product Specifications
- Other Name: Knock Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2022-2024 Honda CR-V | Hybrid EX, Hybrid EX-L, Hybrid Sport, Hybrid Sport Touring, Hybrid Sport-L, Hybrid Touring
- 2012-2019 Honda CR-V | 5 Door EX (2WD), 5 Door EX (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door LX (2WD), 5 Door LX (AWD), 5 Door SE (2WD), 5 Door SE (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD) | KA 5AT, KA CVT
View related parts
Honda CR-V Sensor, Knock
Part Number: 30530-R40-A01
$123.13 MSRP: $175.39
You Save: $52.26 (30%)
ADD TO CART
Product Specifications
- Other Name: Knock Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2011 Honda CR-V | 5 Door EX (2WD), 5 Door EX (4WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door SE (2WD), 5 Door SE (4WD) | KA 5AT
View related parts
Honda CR-V Sensor, Knock
Part Number: 30530-59B-J01
$44.12 MSRP: $62.31
You Save: $18.19 (30%)
Product Specifications
- Other Name: Knock Sensor
- Replaced by: 30530-5PA-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2019 Honda CR-V | 5 Door EX (AWD), 5 Door EX-L (AWD), 5 Door Touring (AWD) | KA CVT
View related parts
Honda CR-V Sensor, Knock
Part Number: 30530-5PA-A01
$44.12 MSRP: $62.31
You Save: $18.19 (30%)
Product Specifications
- Other Name: Knock Sensor
- Replaces: 30530-59B-J01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2024 Honda CR-V | 5 Door EX (2WD), 5 Door EX (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door LX (2WD), 5 Door LX (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD), EX, EX-L, LX, Special Edition, Touring | KA CVT
View related parts
Honda CR-V Sensor Assembly, Knock
Part Number: 30530-PHK-004
Product Specifications
- Other Name: Knock Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1999-2001 Honda CR-V | 5 Door EX, 5 Door LX (2WD), 5 Door LX (4WD), 5 Door SE | KA 4AT, KA 5MT, KL 4AT, KL 5MT

Honda CR-V Knock Sensor

Knock Sensor in Honda CR-V automobiles is a significant device that identifies engine knock and transmits signals to the P.C.M to control timing. Generally, piezoelectric, the sensor translates the pressure pulsations into electric signals to record pressure spikes correlated with knock. This provides the probability to do fitting of the timing subsequent to start to get extra power and to save the engine by reheating the fuel at optimal conditions for the lower octane fuels. Sophisticated system can also control the operation time for each cylinder and manage the pressure of boost, to achieve the primary and secondary efficiency in any situation. Honda CR-V Knock Sensor technology is the premier example of how engine management systems developed over the drive for efficient and reliable operation.

In search of affordable OEM Honda CR-V Knock Sensor? Consider browsing through our extensive inventory of genuine Honda CR-V Knock Sensor. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda CR-V Knock Sensor Parts Questions & Experts Answers

Sensor, Knock
30530-R1A-A01
Q: How to remove and install the knock sensor on the Honda CR-V?
A: Loosen the right front wheel lug nuts on a Civic 1.8L, then raise the vehicle on jackstands. Remove the right front wheel and splash shield. For 2015 and later CR-V models, remove the front floor undercover. Locate the knock sensor on the engine block. On a Civic 1.8L, remove the intake manifold support bracket. Disconnect the sensor's electrical connector, remove the retaining nut, and the sensor. To install, reverse the removal process and tighten the sensor retaining bolt or nut to the torque.