How to remove and install a clutch master cylinder for the Honda Accord?

Remove the air filter housing. Remove the battery and battery tray. Disconnect the hydraulic line mounting bracket. Clamp a pair of locking pliers onto the clutch fluid feed hose, a couple of inches downstream of the reservoir. The pilers should be just tight enough to prevent fluid flow when the hose is disconnected. Disconnect the hydraulic line at the cylinder. Loosen the fluid feed hose clamp and detach the hose from the cylinder. Have rags handy as some fluid will be lost as the line is removed. Cap or plug the ends of the lines (orhose) to prevent fluid leakage and the entry of contaminants. Caution: Don't allow brake fluid to come into contact with the paint as it will damage the finish. Working under the dashboard, remove the cotter pin or spring clip from the master cylinder pushrod clevis. Pull out the clevis pin to disconnect the pushrod from the pedal. Unscrew the two clutch master cylinder retaining nuts and remove the cylinder. Installation is the reverse of removal, noting the following points: Use new gasket between the master cylinder and the firewall. Tighten the master cylinder mounting nuts. Install a new O-ring seal on the hydraulic line fitting at the master cylinder. Fill the clutch master cylinder reservoir with brake fluid conforming to DOT 3 specifications and bleed the clutch system.

Genuine Honda Accord Clutch Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Clutch Master Cylinders found

View related parts
Honda Accord Master Cylinder Assy., Clutch
Part Number: 46920-S7A-A05
$176.52 MSRP: $251.45
You Save: $74.93 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Replaces: 46920-S7A-A03, 46920-S7A-A01, 46920-S7A-A02, 46920-S7A-A04
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2003-2007 Honda Accord | 2 Door EX, 2 Door EX (V6), 2 Door EX V6, 2 Door EX-L, 2 Door EX-V6, 2 Door LX, 2 Door SE, 4 Door DX, 4 Door EX, 4 Door EX (V6), 4 Door EX-L, 4 Door LX, 4 Door SE, 4 Door VP | KA 5MT, KA 6MT, KL 5MT, KL 6MT
View related parts
Honda Accord Master Cylinder Assembly, Clutch
Part Number: 46920-S7A-A04
$176.52 MSRP: $251.45
You Save: $74.93 (30%)
ADD TO CART
Product Specifications
- Other Name: M/Cyl Assembly, Clutch
- Replaced by: 46920-S7A-A05
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2003-2007 Honda Accord | 2 Door EX, 2 Door EX (V6), 2 Door EX V6, 2 Door EX-L, 2 Door EX-V6, 2 Door LX, 2 Door SE, 4 Door DX, 4 Door EX, 4 Door EX (V6), 4 Door EX-L, 4 Door LX, 4 Door SE, 4 Door VP | KA 5MT, KA 6MT, KL 5MT, KL 6MT
View related parts
Honda Accord Master Cylinder Assembly, Clutch
Part Number: 46920-SM4-A03
$180.23 MSRP: $256.73
You Save: $76.50 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1990-1997 Honda Accord | 2 Door DX, 2 Door EX, 2 Door LX, 4 Door DX, 4 Door EX, 4 Door LX, 5 Door EX, 5 Door LX | KA 5MT, KL 5MT
View related parts
Honda Accord Master Cylinder Assembly, Clutch
Part Number: 46920-S84-A02
$240.12 MSRP: $342.05
You Save: $101.93 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1999-2002 Honda Accord | 2 Door EX, 2 Door LX, 4 Door DX, 4 Door EX, 4 Door EX-L, 4 Door EX-UL, 4 Door LX | KA 5MT, KL 5MT
View related parts
Honda Accord Master Cylinder Assembly, Clutch
Part Number: 46925-TVA-A01
$167.49 MSRP: $238.58
You Save: $71.09 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2018-2020 Honda Accord | 4 Door (2.0 Sport), 4 Door Sport | KA 6MT
View related parts
Honda Accord Master Cylinder Assembly, Clutch
Part Number: 46925-TA0-A03
$172.52 MSRP: $245.75
You Save: $73.23 (30%)
Product Specifications
- Other Name: Master Cylinder
- Replaced by: 46925-TA0-305
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2008-2017 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door EX-L V6, 2 Door LX, 2 Door LX-S, 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door SE, 4 Door Sport | KA 5MT, KA 6MT, KL 5MT, KL 6MT
View related parts
Honda Accord M/C Assembly, Clutch
Part Number: 46925-TA0-A02
$172.52 MSRP: $245.75
You Save: $73.23 (30%)
Product Specifications
- Other Name: Master Cylinder
- Replaced by: 46925-TA0-305
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2008-2016 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door EX-L V6, 2 Door LX, 2 Door LX-S, 4 Door EX, 4 Door EX-L, 4 Door LX, 4 Door Sport | KA 5MT, KA 6MT, KL 5MT, KL 6MT
View related parts
Honda Accord Master Cylinder Assembly, Clutch
Part Number: 46920-S84-A01
Product Specifications
- Other Name: Master Cylinder
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1998-1999 Honda Accord | 2 Door EX, 2 Door LX, 4 Door DX, 4 Door EX, 4 Door EX-L, 4 Door LX | KA 5MT, KL 5MT
View related parts
Honda Accord Master Cylinder Assembly, Clutch
Part Number: 46920-671-023
Product Specifications
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1976-1981 Honda Accord | 3 Door DX, 3 Door LX, 3 Door STD, 4 Door DX, 4 Door SE | KA 5MT, KH 5MT, KL 5MT

Honda Accord Clutch Master Cylinder

The Clutch Master Cylinder used in Honda Accord cars is very crucial in producing hydraulic pressure that engages the clutch as one pressed on the clutch pedal. This component translates foot force into hydraulic pressure so that the clutch can be released from the flywheel. Some of the common symptoms are spongy feel for the clutch pedal, there is indication of clutch fluid, and problem in shifting gears. Leakages may sometimes be detected on seals and or cylinder bores therefore rust and moisture may be absorbed by the hydraulic fluid. Clutch master cylinder is an essential automobile part that is accountable for smooth feel and smooth operation of the clutch necessary for the smooth gear shifting of manual transmission.

In search of affordable OEM Honda Accord Clutch Master Cylinder? Consider browsing through our extensive inventory of genuine Honda Accord Clutch Master Cylinder. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Accord Clutch Master Cylinder Parts Questions & Experts Answers

Master Cylinder Assembly, Clutch
46920-S7A-A04
Q: How to remove and install a clutch master cylinder for the Honda Accord?
A: Remove the air filter housing. Remove the battery and battery tray. Disconnect the hydraulic line mounting bracket. Clamp a pair of locking pliers onto the clutch fluid feed hose, a couple of inches downstream of the reservoir. The pilers should be just tight enough to prevent fluid flow when the hose is disconnected. Disconnect the hydraulic line at the cylinder. Loosen the fluid feed hose clamp and detach the hose from the cylinder. Have rags handy as some fluid will be lost as the line is removed. Cap or plug the ends of the lines (orhose) to prevent fluid leakage and the entry of contaminants. Caution: Don't allow brake fluid to come into contact with the paint as it will damage the finish. Working under the dashboard, remove the cotter pin or spring clip from the master cylinder pushrod clevis. Pull out the clevis pin to disconnect the pushrod from the pedal. Unscrew the two clutch master cylinder retaining nuts and remove the cylinder. Installation is the reverse of removal, noting the following points: Use new gasket between the master cylinder and the firewall. Tighten the master cylinder mounting nuts. Install a new O-ring seal on the hydraulic line fitting at the master cylinder. Fill the clutch master cylinder reservoir with brake fluid conforming to DOT 3 specifications and bleed the clutch system.

Related Honda Accord Parts

Browse by Year