×
- Live Chat
- 1-888-984-2011
My Garage
My Account
Cart
Genuine Honda Prelude Blower Motor
A/C Heater Blower Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
17 Blower Motors found
Honda Prelude Motor Assembly, Fan (W/Fan)
Part Number: 79310-SR3-A01$170.31 MSRP: $242.60You Save: $72.29 (30%)
About Honda Prelude Blower Motor
A Honda Prelude needs to be kept in good working condition in your vehicle. The online catalog we provide will get you through the ordering process safely and securely. All genuine Honda Blower Motors from us are shipped directly from authorized Honda Dealer. If you want search for Honda Blower Motor fast and easily, just come to Hondapartsnow.com to look for your parts.
Honda Prelude Blower Motor Parts Questions & Experts Answers
- Q: How Do I Replace or Service the Heater, A/C Switch,Blower Motor and Control Components on a Honda Prelude?A: The SRS system should always be disarmed before performing dash repairs. On Accord and Prelude models, removing the blower motor might require taking out the A/C evaporator. Only MVAC trained and EPA certified technicians should service A/C components due to legal implications. For the Accord 1996-97 models, remove the negative battery cable, glove box door and frame, and heater duct. Detach electrical connectors from the blower motor, remove fasteners, and take the motor out downwards. For the Prelude 1996 models, detach the negative battery cable, take out the glove box and frame, and remove the heater duct. Disconnect all electrical connections from the blower motor, remove the blower resistor, recirculation motor, and two nuts from the bolts. For the heater core, take your vehicle to an approved facility and discharge the A/C system. Drain the engine coolant, remove the heater control valve, and take out the heater hoses. For the heater water control valve, turn the ignition switch to ON, set the heater temperature to full hot, then switch OFF. Drain the coolant, or clamp the two heater hoses. Remove the control valve cable clamp and cable, and take out the heater hoses and the control valve. For the control panel, remove the center trim panel, detach the air mix control cable from the heater unit, remove panel retaining screws, and pull the heater control panel from the dash.
Related Honda Prelude Parts
Honda Prelude Blend Door Actuator
Honda Prelude Blower Motor Resistor
Honda Prelude A/C Clutch
Honda Prelude Evaporator
Honda Prelude A/C Expansion Valve
Honda Prelude A/C Switch
Honda Prelude A/C Hose
Honda Prelude A/C Accumulator
Browse by Year
2001 Blower Motor 2000 Blower Motor 1999 Blower Motor 1998 Blower Motor 1997 Blower Motor 1996 Blower Motor 1995 Blower Motor 1994 Blower Motor 1993 Blower Motor 1992 Blower Motor 1991 Blower Motor 1990 Blower Motor 1989 Blower Motor 1988 Blower Motor 1987 Blower Motor 1986 Blower Motor 1985 Blower Motor 1984 Blower Motor 1983 Blower Motor 1982 Blower Motor 1981 Blower Motor 1980 Blower Motor 1979 Blower Motor