How do you disconnect and replace the ignition switch and key lock cylinder on Honda Odyssey?

Disconnect the cable from the negative battery terminal and wait at least three minutes before proceeding. Remove the knee bolster and the upper and lower steering column covers. Detach the driver's side fuse and relay box. Disconnect the ignition switch electrical connector from the fuse and relay box. Remove the ignition switch mounting screws and take out the switch. Installation is the reverse of removal. When finished, reconnect the cable to the negative battery terminal and verify that the ignition switch operates correctly in the LOCK, ACC, ON, and START positions. The lock cylinder cannot be replaced by itself; the entire housing must be replaced. Remove the shear-head bolts, take off the bracket, and detach the ignition Lock Cylinder housing from the steering column. Shear-head bolt removal can be accomplished by drilling a hole in the center of each bolt and unscrewing them with a screw extractor. Installation is the reverse of removal, tightening the ignition Lock Cylinder housing bolts until the hex heads break off. Reconnect the cable to the negative battery terminal and verify that the ignition Lock Cylinder works correctly.

Genuine Honda Odyssey Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Ignition Switches found

View related parts
Honda Odyssey Switch, Steering
Part Number: 35130-SAA-J51
$73.64 MSRP: $104.01
You Save: $30.37 (30%)
ADD TO CART
Product Specifications
- Other Name: Ignition Switch; Switch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2005-2010 Honda Odyssey | 5 Door EX, 5 Door EX-L, 5 Door EXL-T, 5 Door LX | KA 5AT
View related parts
Honda Odyssey Switch Assembly, Start Sto
Part Number: 35881-TBA-A01
$24.86 MSRP: $35.12
You Save: $10.26 (30%)
ADD TO CART
Product Specifications
- Other Name: Start Button; Power Switch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2018-2024 Honda Odyssey | 5 Door ELITE (10AT), 5 Door EX, 5 Door EX (10AT), 5 Door EX-L, 5 Door EX-L (10AT), 5 Door LX, 5 Door LX (10AT), 5 Door Touring (10AT), EX, EX-L, Elite, Sport, Touring | KA 9AT, KA XAT
View related parts
Honda Odyssey Switch, Steering
Part Number: 35130-SZA-901
$55.11 MSRP: $77.84
You Save: $22.73 (30%)
ADD TO CART
Product Specifications
- Other Name: Ignition Switch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2011-2017 Honda Odyssey | 5 Door EX, 5 Door EX-L, 5 Door LX, 5 Door Touring | KA 5AT, KA 6AT
View related parts
Honda Odyssey Switch Assembly
Part Number: 35881-TK8-A01
$187.77 MSRP: $267.48
You Save: $79.71 (30%)
ADD TO CART
Product Specifications
- Other Name: Start Button; Power Switch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2014-2017 Honda Odyssey | 5 Door EX, 5 Door EX-L, 5 Door SE, 5 Door Touring | KA 6AT
View related parts
Honda Odyssey Switch, Steering
Part Number: 35130-S0X-A01
$144.42 MSRP: $205.73
You Save: $61.31 (30%)
ADD TO CART
Product Specifications
- Other Name: Ignition Switch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1999-2000 Honda Odyssey | 5 Door EX, 5 Door LX, 5 Door VAN | KA 4AT
View related parts
Honda Odyssey Switch, Steering
Part Number: 35130-S0X-A02
$144.42 MSRP: $205.73
You Save: $61.31 (30%)
ADD TO CART
Product Specifications
- Other Name: Ignition Switch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2001-2004 Honda Odyssey | 5 Door EX, 5 Door EX-L, 5 Door LX, 5 Door VAN | KA 4AT, KA 5AT
View related parts
Honda Odyssey Switch, Steering
Part Number: 35130-SX0-A11
Product Specifications
- Other Name: Ignition Switch
- Replaces: 35130-SX0-Y11
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1998 Honda Odyssey | 5 Door EX, 5 Door LX (6 Seats), 5 Door LX (7 Seats) | KA 4AT
View related parts
Honda Odyssey Switch, Steering
Part Number: 35130-SX0-A01
Product Specifications
- Other Name: Ignition Switch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1995-1997 Honda Odyssey | 5 Door EX, 5 Door LX (6 Seats), 5 Door LX (7 Seats) | KA 4AT

About Honda Odyssey Ignition Switch

A Honda Odyssey needs to be kept in good working condition in your vehicle. The online catalog we provide will get you through the ordering process safely and securely. All genuine Honda Ignition Switches from us are shipped directly from authorized Honda Dealer. If you want search for Honda Ignition Switch fast and easily, just come to Hondapartsnow.com to look for your parts.

Honda Odyssey Ignition Switch Parts Questions & Experts Answers

Switch, Steering
35130-SAA-J51
Q: How do you disconnect and replace the ignition switch and key lock cylinder on Honda Odyssey?
A: Disconnect the cable from the negative battery terminal and wait at least three minutes before proceeding. Remove the knee bolster and the upper and lower steering column covers. Detach the driver's side fuse and relay box. Disconnect the ignition switch electrical connector from the fuse and relay box. Remove the ignition switch mounting screws and take out the switch. Installation is the reverse of removal. When finished, reconnect the cable to the negative battery terminal and verify that the ignition switch operates correctly in the LOCK, ACC, ON, and START positions. The lock cylinder cannot be replaced by itself; the entire housing must be replaced. Remove the shear-head bolts, take off the bracket, and detach the ignition Lock Cylinder housing from the steering column. Shear-head bolt removal can be accomplished by drilling a hole in the center of each bolt and unscrewing them with a screw extractor. Installation is the reverse of removal, tightening the ignition Lock Cylinder housing bolts until the hex heads break off. Reconnect the cable to the negative battery terminal and verify that the ignition Lock Cylinder works correctly.