Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2018-2024 Honda Odyssey | 5 Door EX, 5 Door EX (10AT), 5 Door EX-L, 5 Door EX-L (10AT), 5 Door LX, 5 Door LX (10AT), 5 Door Touring (10AT), EX, EX-L, Elite, Sport, Touring | KA 9AT, KA XAT
Q: How do you disconnect and replace the hazard flasher and light control switches on Honda Odyssey?
A: Disconnect the cable from the negative battery terminal and wait at least three minutes before proceeding. For 2004 and earlier models, carefully pry the switch trim panel loose using a panel removal tool or a flat-blade screwdriver, ensuring to tape the end of the screwdriver to protect the plastic trim panel. Pull it out far enough to disconnect the electrical connector and remove the switch being replaced by depressing the locking springs and pushing the switch out through the front of the trim panel. For 2005 and later models, remove the instrument panel end cover, reach through the opening to release the hook at the bottom of the switch panel, and pull out the switch panel. The switches can be removed after disconnecting the wires. To replace the hazard flasher switch, disconnect the cable from the negative battery terminal, remove the instrument panel trim panel, disconnect the electrical connector from the hazard flasher switch by depressing the lock tab, and remove the switch by depressing the lock spring on top and pushing it through the front of the panel. Installation is the reverse of removal, followed by reconnecting the cable to the negative battery terminal and verifying the switch works correctly. For the light control switch, disconnect the cable from the negative battery terminal, remove the center trim panel, disconnect the electrical connector by depressing the lock tab, and remove the switch by depressing the locking springs at the top and bottom, then pushing it out through the front of the trim panel. Installation is the reverse of removal, and once completed, reconnect the cable to the negative battery terminal and verify the switch functions correctly.