How do you disconnect and remove the CMP sensor and timing belt components on Honda Odyssey?

Disconnect the cable from the negative battery terminal. Disconnect the CMP sensor electrical connector by depressing the release button and pulling the upper half of the connector straight up, then disengage the lower half from its mounting bracket by depressing the release button and pushing the connector straight down. Remove the timing belt cover and the timing belt, followed by the camshaft timing belt sprocket from the front cylinder head. Detach the rear timing belt cover by removing the mounting bolts and then take off the cover. Remove the CMP sensor by detaching it from the rear timing belt cover after taking out the mounting bolts. Installation is the reverse of removal, ensuring to tighten the CMP sensor mounting bolts to the specified torque. Finally, reconnect the cable to the negative battery terminal.

Genuine Honda Odyssey Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Camshaft Position Sensors found

View related parts
Honda Odyssey Sensor Assembly, Tdc
Part Number: 37840-R70-A01
$142.12 MSRP: $202.46
You Save: $60.34 (30%)
ADD TO CART
Product Specifications
- Other Name: Camshaft Position Sensor; Camshaft Sensor, Sensor, TDC Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2008-2022 Honda Odyssey | 5 Door ELITE (10AT), 5 Door EX, 5 Door EX (10AT), 5 Door EX-L, 5 Door EX-L (10AT), 5 Door EXL-T, 5 Door LX, 5 Door LX (10AT), 5 Door SE, 5 Door Touring, 5 Door Touring (10AT) | KA 5AT, KA 6AT, KA 9AT, KA XAT
View related parts
Honda Odyssey Sensor Assembly, Tdc
Part Number: 37840-PGE-A11
$127.51 MSRP: $181.64
You Save: $54.13 (30%)
ADD TO CART
Product Specifications
- Other Name: Camshaft Position Sensor; Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2005-2010 Honda Odyssey | 5 Door EX, 5 Door EX-L, 5 Door EXL-T, 5 Door LX | KA 5AT
View related parts
Honda Odyssey Sensor (TDC1-TDC2)
Part Number: 37840-P8A-305
$97.60 MSRP: $137.85
You Save: $40.25 (30%)
ADD TO CART
Product Specifications
- Other Name: Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 37840-P8A-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1999-2004 Honda Odyssey | 5 Door EX, 5 Door EX-L, 5 Door LX, 5 Door VAN | KA 4AT, KA 5AT

Honda Odyssey Camshaft Position Sensor Parts Questions & Experts Answers

Sensor (TDC1-TDC2)
37840-P8A-305
Q: How do you disconnect and remove the CMP sensor and timing belt components on Honda Odyssey?
A: Disconnect the cable from the negative battery terminal. Disconnect the CMP sensor electrical connector by depressing the release button and pulling the upper half of the connector straight up, then disengage the lower half from its mounting bracket by depressing the release button and pushing the connector straight down. Remove the timing belt cover and the timing belt, followed by the camshaft timing belt sprocket from the front cylinder head. Detach the rear timing belt cover by removing the mounting bolts and then take off the cover. Remove the CMP sensor by detaching it from the rear timing belt cover after taking out the mounting bolts. Installation is the reverse of removal, ensuring to tighten the CMP sensor mounting bolts to the specified torque. Finally, reconnect the cable to the negative battery terminal.