How to remove and install the Rack And Pinion on a Honda Fit?

Remove the subframe. On 2007 and 2008 models, remove the flange bolts, stiffener plate, gearbox mounting bracket, and the mounting cushion. On 2009 and later models, remove the stiffener plate bolts and the Rack And Pinion-to-subframe bolts. Remove the Rack And Pinion from the subframe. Installation is the reverse of the removal procedure. Replace any deteriorated rubber parts with new ones. On 2007 and 2008 models, install the mounting cushion and ensure the tab is aligned with the paint mark on the Rack And Pinion. Tighten all fasteners to the torque values.

Genuine Honda Fit Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Rack And Pinions found

View related parts
Honda Fit Box, Steering Gear
Part Number: 53601-TK6-A03
$1500.88 MSRP: $2165.77
You Save: $664.89 (31%)
ADD TO CART
Product Specifications
- Other Name: Steering Gear; Gear Assembly
- Replaces: 53601-TK6-A02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2009-2013 Honda Fit | 5 Door FIT, 5 Door Sport | KA 5AT, KA 5MT
View related parts
Honda Fit Box Assembly, Steering Gear (Driver Side)
Part Number: 53400-T5R-A01
$530.51 MSRP: $765.53
You Save: $235.02 (31%)
ADD TO CART
Product Specifications
- Other Name: Steering Gear; Gear Assembly
- Position: Driver Side
- Replaces: 53400-TST-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2015-2016 Honda Fit | 5 Door EX, 5 Door EX-L, 5 Door EX-LN, 5 Door LX | KA 6MT, KA CVT
View related parts
Honda Fit Rack Assembly, Power Steering (Eps)
Part Number: 53601-SLN-A17
$1691.82 MSRP: $2441.30
You Save: $749.48 (31%)
ADD TO CART
Product Specifications
- Other Name: Steering Gear; Gear Assembly
- Replaces: 53601-SLN-A16, 53601-SLN-A14, 53601-SLN-A15
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2007-2008 Honda Fit | 5 Door Base, 5 Door Sport | KA 5AT, KA 5MT
View related parts
Honda Fit Gear Box Assembly, Steering
Part Number: 53400-T5R-A02
$530.51 MSRP: $765.53
You Save: $235.02 (31%)
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Replaces: 53400-TST-A02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2020 Honda Fit | 5 Door EX, 5 Door EX-L, 5 Door EX-LN, 5 Door LX, 5 Door LX SE, 5 Door Sport | KA 6MT, KA CVT

Honda Fit Rack And Pinion

Honda Fit vehicle has Rack And Pinion which is a steering mechanism that link the rotational movement of the steering wheel to lateral movement of front wheels. This kind of steering is called rack and pinion and it consists of a pinion which is fixed on the steering column and a rack that is housed in a metal tubing, it connects to the wheels through tie rods. Almost all today's Honda Fit cars use power steering, which in this case is a rack and pinion type, and which is helped by hydraulic fluid for ease of use. It uses a cylinder that is filled with a hydraulic fluid, and a piston which interacts with the movement of a steering wheel to channel hydraulic pressure needed to turn the rack. Whereas, earlier model cars use manual racks, the power-assisted models are better in terms of default steering response and feel. The problem areas of the Rack And Pinion involve leaks or stiffness in the steering caused by wear and tear of the part. Daily inspection of these parts should be done to ensure they are not leaking and that seals and bushing are in good condition so that expensive repairs do not have to be made from time to time.

In search of affordable OEM Honda Fit Rack And Pinion? Consider browsing through our extensive inventory of genuine Honda Fit Rack And Pinion. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Fit Rack And Pinion Parts Questions & Experts Answers

Rack Assembly, Power Steering (Eps)
53601-SLN-A17
Q: How to remove and install the Rack And Pinion on a Honda Fit?
A: Remove the subframe. On 2007 and 2008 models, remove the flange bolts, stiffener plate, gearbox mounting bracket, and the mounting cushion. On 2009 and later models, remove the stiffener plate bolts and the Rack And Pinion-to-subframe bolts. Remove the Rack And Pinion from the subframe. Installation is the reverse of the removal procedure. Replace any deteriorated rubber parts with new ones. On 2007 and 2008 models, install the mounting cushion and ensure the tab is aligned with the paint mark on the Rack And Pinion. Tighten all fasteners to the torque values.