How Do I Replace a Brake Disc on Honda Fit?

Loosen the wheel lug nuts, raise the vehicle and support it securely. Remove the wheel and install the lug nuts. Remove the brake caliper and suspend it out of the way. Visually inspect the disc surface. Check disc runout with a dial indicator. Remove the caliper mounting bracket bolts and detach the bracket. Remove the disc from the hub. Place the disc in position and install the caliper mounting bracket. Install the caliper and wheel, then lower the vehicle. Tighten the lug nuts and depress the brake pedal. Bleed the brakes if necessary. Check the brakes before driving.

Genuine Honda Fit Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Discs found

View related parts
Honda Fit Disk, Front Brake
Part Number: 45251-SCC-901
$84.96 MSRP: $120.00
You Save: $35.04 (30%)
ADD TO CART
Product Specifications
- Position: Front
- Replaced by: 45251-TAR-G00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2007-2013 Honda Fit | 5 Door Base, 5 Door FIT, 5 Door Sport | KA 5AT, KA 5MT
View related parts
Honda Fit Disk, Front Brake
Part Number: 45251-T5R-A02
$84.96 MSRP: $120.00
You Save: $35.04 (30%)
ADD TO CART
Product Specifications
- Other Name: Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2015-2020 Honda Fit | 5 Door EX, 5 Door EX-L, 5 Door EX-LN, 5 Door LX, 5 Door LX SE, 5 Door Sport | KA 6MT, KA CVT

Honda Fit Brake Disc Parts Questions & Experts Answers

Disk, Front Brake
45251-SCC-901
Q: How Do I Replace a Brake Disc on Honda Fit?
A: Loosen the wheel lug nuts, raise the vehicle and support it securely. Remove the wheel and install the lug nuts. Remove the Brake Caliper and suspend it out of the way. Visually inspect the disc surface. Check disc runout with a dial indicator. Remove the caliper mounting bracket bolts and detach the bracket. Remove the disc from the hub. Place the disc in position and install the caliper mounting bracket. Install the caliper and wheel, then lower the vehicle. Tighten the lug nuts and depress the brake pedal. Bleed the brakes if necessary. Check the brakes before driving.