How Can I Replace the Driveaxle Oil Seals on Honda Del Sol?

Wheel seal leaks often occur due to worn wheel seals. Raise the vehicle and support it securely on jackstands. Remove the driveaxles and pry the wheel seal out. Use a special wheel seal removal tool if needed. Install the new seal with a large socket or pipe. Drive it squarely into the bore and coat the seal lip with lubricant. Install the driveaxle(s) carefully.

Genuine Honda Del Sol Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Seals found

View related parts
Honda Del Sol Ring, Front Knuckle
Part Number: 44348-SR3-000
$7.33 MSRP: $10.35
You Save: $3.02 (30%)
ADD TO CART
Product Specifications
- Other Name: Wheel Bearing Dust Shield; Wheel Bearing Seal
- Position: Front
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1993-1995 Honda Del Sol | 2 Door S, 2 Door SI, 2 Door V-TEC | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Del Sol Ring, L. Spindle
Part Number: 42412-SB2-020
Product Specifications
- Other Name: Hub & Bearing Ring; Hub & Bearing, Ring
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1993-1995 Honda Del Sol | 2 Door S | KA 4AT, KA 5MT, KL 4AT, KL 5MT

Honda Del Sol Wheel Seal

In search of affordable OEM Honda Del Sol Wheel Seal? Consider browsing through our extensive inventory of genuine Honda Del Sol Wheel Seal. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Del Sol Wheel Seal Parts Questions & Experts Answers

Ring, Front Knuckle
44348-SR3-000
Q: How Can I Replace the Driveaxle Oil Seals on Honda Del Sol?
A: Wheel seal leaks often occur due to worn wheel seals. Raise the vehicle and support it securely on jackstands. Remove the driveaxles and pry the wheel seal out. Use a special wheel seal removal tool if needed. Install the new seal with a large socket or pipe. Drive it squarely into the bore and coat the seal lip with lubricant. Install the driveaxle(s) carefully.