×
- Live Chat
- 1-888-984-2011
My Garage
My Account
Cart
Genuine Honda CRX Washer Reservoir
Windshield Washer Reservoir- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Washer Reservoirs found
Honda CRX Washer Reservoir
The feature named Windshield Washer Reservoir found in Honda CRX vehicles is very important since it is a container that holds windshield washer fluid thus providing drivers with clear vision of the road. This is usually made of hard plastic though it can sometimes be metallic and its position may range from just behind the engine block to close to the head light area in the engine compartment. Honda CRX over the year has incorporated different styles of the Windshield Washer Reservoir, though the basic form has remained fixed. Materials: worth to mention that the plastic casing is quite durable but can turn rather brittle and vulnerable to cracking if the levels of the fluid are not monitored adequately. This shows that, regular checks are vital to ensure that the Windshield Washer Reservoir is full to allow the Honda CRX meet its intended performance.
In search of affordable OEM Honda CRX Washer Reservoir? Consider browsing through our extensive inventory of genuine Honda CRX Washer Reservoir. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.
Honda CRX Washer Reservoir Parts Questions & Experts Answers
- Q: How do you remove and install the washer fluid reservoir and Washer Pump on Honda CRX?A: On 1984-87 models, the washer fluid reservoir is accessible through the engine compartment; however, the washer fluid tank in cases of 1988-91 models demands a front bumper cover to be unbolted. The front and rear washer motors are included in the reservoir of all models. Start by removing the first of the negative cables on the battery. For 1988-91 models the front bumper cover must be removed. Subsequently, pull the electrical leads out from the washer pump motors along with the connector and then remove one of the hoses connected to the reservoir to drain the washer fluid and it should be collected in a suitable receptacle in order to be reutilized. Pull the other hose loose from the tank, and then undo the tank retaining bolts, which vary according to the car's production year: 1984-87 models need two, while 1988-91 models require three. For the 1984-1987 models, the tank is to be slide off from above through the engine hood while for the 1988-1991 models one has to remove it from beneath the car. If required, the washer pumps can now be removed. If the pumps were removed, then these need to be placed back at the tank installation and then the tank needs to be fixed in its place at the car and then the mounting bolts need to be tightened to 7 ft. lbs. (10 Nm). Attach the electrical lead and hoses; refit the front bumper assembly, (early model), (late model); rejoin the negative terminal on the battery. Last of all, add water into the reservoir and then check the functionality of the system.
