How do you remove and install the rotor from the distributor shaft on Honda CRX?

Take off the distributor cap and pull out the Distributor Rotor from the distributor shaft. Damn and burns on the Distributor Rotor have to be checked; if possible, it should be replaced, and the tip may be lightly filed when required. To remove, tilt back the distributor, apply a little amount of silicone grease on the Distributor Rotor tips, release the Distributor Rotor and work in the reverse of the installation process.

Genuine Honda CRX Distributor Rotor

Ignition Distributor Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Distributor Rotors found

View related parts
Honda CRX Head, Rotor
Part Number: 30103-PE1-731
$5.54 MSRP: $8.04
You Save: $2.50 (32%)
ADD TO CART
Product Specifications
- Other Name: Rotor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1986-1987 Honda CRX | 2 Door HF | KA 5MT, KH 5MT
View related parts
Honda CRX Head, Rotor
Part Number: 30103-PA1-732
Product Specifications
- Replaced by: 30103-PE9-006
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1985-1987 Honda CRX | 2 Door SI | KA 5MT, KL 5MT
View related parts
Honda CRX Head, Rotor
Part Number: 30103-PA1-733
Product Specifications
- Replaced by: 30103-PE9-006
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1985-1987 Honda CRX | 2 Door SI | KA 5MT, KL 5MT
View related parts
Honda CRX Rotor, Distributor
Part Number: 30103-PA5-005
Product Specifications
- Other Name: Rotor
- Replaces: 30103-PA0-005, 30103-PB9-601, 30103-634-005, 30103-PC2-661
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1984-1987 Honda CRX | 2 Door DX, 2 Door HF | KA 3AT, KA 4AT, KA 5MT, KH 5MT, KL 3AT, KL 4AT, KL 5MT
View related parts
Honda CRX Head Assy., Rotor Set
Part Number: 30103-PM5-A05
Product Specifications
- Other Name: Rotor
- Replaces: 30103-PM5-A04, 30103-PM5-A03, 30103-PM5-A02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1988-1991 Honda CRX | 2 Door DX, 2 Door HF, 2 Door SI | KA 4AT, KA 5MT, KH 5MT, KL 4AT, KL 5MT
View related parts
Honda CRX Head, Rotor
Part Number: 30103-PC3-822
Product Specifications
- Replaced by: 30103-PE9-006
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1985-1987 Honda CRX | 2 Door SI | KA 5MT, KL 5MT
View related parts
Honda CRX Head, Rotor
Part Number: 30103-PB9-601
Product Specifications
- Replaced by: 30103-PA5-005
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1984-1987 Honda CRX | 2 Door DX, 2 Door HF | KA 3AT, KA 4AT, KA 5MT, KH 5MT, KL 3AT, KL 4AT, KL 5MT
View related parts
Honda CRX Head Assy., Rotor Set
Part Number: 30103-PM5-A02
Product Specifications
- Replaced by: 30103-PM5-A05
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1988 Honda CRX | 2 Door DX, 2 Door HF, 2 Door SI | KA 4AT, KA 5MT, KH 5MT, KL 4AT, KL 5MT
View related parts
Honda CRX Head Assy., Rotor Set
Part Number: 30103-PM5-A04
Product Specifications
- Replaced by: 30103-PM5-A05
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1989-1991 Honda CRX | 2 Door DX, 2 Door HF, 2 Door SI | KA 4AT, KA 5MT, KH 5MT, KL 4AT, KL 5MT

Honda CRX Distributor Rotor Parts Questions & Experts Answers

Rotor, Distributor
30103-PA5-005
Q: How do you remove and install the rotor from the distributor shaft on Honda CRX?
A: Take off the distributor cap and pull out the Distributor Rotor from the distributor shaft. Damn and burns on the Distributor Rotor have to be checked; if possible, it should be replaced, and the tip may be lightly filed when required. To remove, tilt back the distributor, apply a little amount of silicone grease on the Distributor Rotor tips, release the Distributor Rotor and work in the reverse of the installation process.