×
- Live Chat
- 1-888-984-2011
My Garage
My Account
Cart
Genuine Honda Crosstour Throttle Body
Fuel Injection Throttle Body- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Throttle Bodies found
Honda Crosstour Throttle Body, Electronic Control (Gmc1E)
Part Number: 16400-RN0-A01$232.03 MSRP: $330.53You Save: $98.50 (30%)
Honda Crosstour Throttle Body, Electronic Control (Gmd7E)
Part Number: 16400-R11-A01$214.91 MSRP: $306.14You Save: $91.23 (30%)
Honda Crosstour Electronic Control
Part Number: 16400-5G0-A01$196.64 MSRP: $280.12You Save: $83.48 (30%)
Honda Crosstour Throttle Body
The Throttle Body is a component of Honda Crosstour vehicles; it regulates the amount of air allowed into the engine with regard to the position of the accelerator pedal. This has a butterfly valve designed in such a way that it opens as the pedal is depressed to allow more air in. The Throttle Position Sensor (TPS) gives signals to the PCM which in conjunction with other sensors estimates fuel flow. Older models will have a Throttle Body Injection system abbreviated as TBI while the newer models will have a multi-port, fuel injection with separate fuel delivery. Electronic throttle control (ETC) has become very common with most vehicles replacing the use of mechanical linkage. Overall, throttle bodies are very dependable, but will need some level of servicing through either cleaning or replacement after some period of usage.
In search of affordable OEM Honda Crosstour Throttle Body? Consider browsing through our extensive inventory of genuine Honda Crosstour Throttle Body. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.
Honda Crosstour Throttle Body Parts Questions & Experts Answers
- Q: How to replace the Throttle Body on Honda Crosstour?A: To replace the throttle body, remove the air intake duct, disconnect the electrical connectors, and clamp off the coolant hoses. Disconnect all hoses, disconnect the accelerator and cruise control cables, and detach the wiring harness clip. Remove the mounting bolts and nuts, discard the old gasket, and clean the bore. Install the throttle body with a new gasket, check the coolant level, and adjust the accelerator cable. Perform the PCM idle learn procedure and check for air and coolant leaks.
