How to remove and install the Power Steering Pump for the Honda Crosstour?

Use shop towels to protect engine components from spilled fluid during this procedure. Clean any spilled fluid immediately. On V6 models, remove the engine mount bracket on the right side of the engine, if equipped. Remove the drivebelt. Place a clamp on the power steering feed hose to minimize fluid loss when the hose is disconnected, then disconnect the fluid hoses at the pump. Note the difference between the pressure and the return (feed) hoses; the return hose is held to the pump with a spring type clamp, and the pressure line has two bolls holding it to the pump body. Cap or plug both hoses to prevent leakage or contamination. Install a new 0-ring on the end of the pressure line. Remove the pump mounting bolls and then remove the pump from the engine. Installation is the reverse of removal. Be sure to bleed the power steering system.

Genuine Honda Crosstour Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Power Steering Pumps found

View related parts
Honda Crosstour Pump Sub-Assembly, Power Steering
Part Number: 56110-R70-A12
$547.92 MSRP: $790.65
You Save: $242.73 (31%)
ADD TO CART
Product Specifications
- Other Name: Power Steering Pump
- Replaces: 56110-R70-A11
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2012 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 5AT
View related parts
Honda Crosstour Pump, Reman
Part Number: 06561-R70-505RM
$316.95 MSRP: $447.75
You Save: $130.80 (30%)
ADD TO CART
Product Specifications
- Other Name: Power Steering Pump
- Replaces: 56100-R70-A12RM
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2012 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 5AT
View related parts
Honda Crosstour Pump Assembly, Power Steering (L4) (Coo)
Part Number: 56100-5J0-315
$442.99 MSRP: $639.23
You Save: $196.24 (31%)
ADD TO CART
Product Specifications
- Other Name: Power Steering Pump
- Replaces: 56100-5J0-A01, 56100-5J0-305
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2012-2015 Honda Crosstour | 5 Door EX, 5 Door EX-L | KA 5AT

Honda Crosstour Power Steering Pump

The Power Steering Pump in the Honda Crosstour automobile is essential when it comes to transforming energy from the engine into hydraulic power needed in steering. In the following manner of application, the pump supplies hydraulic power to the steering operation thus lowering the level of difficulty of rotating the steering wheel with a view of operating the vehicle. Honda Crosstour Power Steering Pumps involves the utilization of hydraulic fluids and supporting mechanism that offers superior effort for steering, besides there being a mechanical link between the steering wheel and the wheels in event of the power system collapsing for the Honda Crosstour models with manual steering. Also, it is possible to see constructions vehicles in which steering wheels could be equipped with other hydraulic cylinders working in opposite directions. In conclusion, it can be explained that Power Steering Pump is significantly important element for decreasing driver's power and increasing the control level of steering in Honda Crosstour vehicles.

In search of affordable OEM Honda Crosstour Power Steering Pump? Consider browsing through our extensive inventory of genuine Honda Crosstour Power Steering Pump. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Crosstour Power Steering Pump Parts Questions & Experts Answers

Pump Sub-Assembly, Power Steering
56110-R70-A12
Q: How to remove and install the Power Steering Pump for the Honda Crosstour?
A: Use shop towels to protect engine components from spilled fluid during this procedure. Clean any spilled fluid immediately. On V6 models, remove the engine mount bracket on the right side of the engine, if equipped. Remove the drivebelt. Place a clamp on the power steering feed hose to minimize fluid loss when the hose is disconnected, then disconnect the fluid hoses at the pump. Note the difference between the pressure and the return (feed) hoses; the return hose is held to the pump with a spring type clamp, and the pressure line has two bolls holding it to the pump body. Cap or plug both hoses to prevent leakage or contamination. Install a new 0-ring on the end of the pressure line. Remove the pump mounting bolls and then remove the pump from the engine. Installation is the reverse of removal. Be sure to bleed the power steering system.