What is the purpose and location of the MAF/IAT sensor in Honda Crosstour, and how is it disconnected and reinstalled?

As a note, 2003 and 2004 SULEV and LX-P 4-cylinder models and all 2005 and later four cylinder models are equipped with an MAF/Intake Manifold Temperature Sensor, which combines the functions of the MAF and Intake Manifold Temperature (IMT) sensors into one unit. The sensor is located on the air filter housing. To disconnect the electrical connector, depress the release tab and disconnect the electrical connector, then remove the retaining screws. Remove the sensor retaining screws and remove the sensor. To reinstall, switch the removal steps going from the last step to the first step.

Genuine Honda Crosstour Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Mass Air Flow Sensors found

View related parts
Honda Crosstour Meter, Air Flow
Part Number: 37980-RC0-M01
$207.24 MSRP: $295.21
You Save: $87.97 (30%)
ADD TO CART
Product Specifications
- Other Name: Mass Air Flow Sensor; Air Mass Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2015 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 6AT
View related parts
Honda Crosstour Meter Assembly, Air Flow
Part Number: 37980-RNA-A01
$207.27 MSRP: $295.25
You Save: $87.98 (30%)
ADD TO CART
Product Specifications
- Other Name: Mass Air Flow Sensor; Air Mass Sensor
- Replaces: 37980-RV0-A01, 37980-RAD-L11
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2012 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 5AT
View related parts
Honda Crosstour Meter Assembly, Air Flow
Part Number: 37980-R11-A02
$232.54 MSRP: $331.24
You Save: $98.70 (30%)
ADD TO CART
Product Specifications
- Other Name: Mass Air Flow Sensor
- Replaced by: 37980-RLF-013
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2012-2015 Honda Crosstour | 5 Door EX, 5 Door EX-L | KA 5AT

Honda Crosstour Mass Air Flow Sensor

The Mass Air Flow Sensor (MAF) in Honda Crosstour cars is highly functional in providing the efficiency in the engines through the determination of the amount of air in its intake. All this information is communicated to the Powertrain Control Module (PCM) which in turn reprograms the fuel injector to adjust the timing and hence achieve the correct air/fuel ratio. The MAF sensor can be of several types, namely Vane Meter (VAF) and Hot Wire sensors - both of which use different techniques to calculate the airflow. As for the essence of their functioning, while the VAF sensor concerns a spring-loaded vane, the Hot Wire sensor considers changes in current in a heated wire and seems more accurate one. Periodically these sensors become contaminated and lead to problems such as stalling or bad air-fuel ratios. Proper care is to be always given to the Mass Air Flow Sensor so that the engine in the Honda Crosstour cars runs smoothly in all situations.

In search of affordable OEM Honda Crosstour Mass Air Flow Sensor? Consider browsing through our extensive inventory of genuine Honda Crosstour Mass Air Flow Sensor. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Crosstour Mass Air Flow Sensor Parts Questions & Experts Answers

Meter Assembly, Air Flow
37980-R11-A02
Q: What is the purpose and location of the MAF/IAT sensor in Honda Crosstour, and how is it disconnected and reinstalled?
A: As a note, 2003 and 2004 SULEV and LX-P 4-cylinder models and all 2005 and later four cylinder models are equipped with an MAF/Intake Manifold Temperature Sensor, which combines the functions of the MAF and Intake Manifold Temperature (IMT) sensors into one unit. The sensor is located on the air filter housing. To disconnect the electrical connector, depress the release tab and disconnect the electrical connector, then remove the retaining screws. Remove the sensor retaining screws and remove the sensor. To reinstall, switch the removal steps going from the last step to the first step.