How do you replace the low-beam and high-beam headlight bulbs on Honda Crosstour?

To replace the low-beam headlight bulb, first remove the two forward fasteners securing the inner fender splash shield, then pull the splash shield back for access to the bulb. For V6 models with a manual transmission, also remove the air duct accessible through the inner fender panel. To replace a high-beam bulb on the left (driver's) side, remove the air intake cover from in front of the battery. Disconnect the electrical connector from the headlight by depressing the release lever and pulling off the connector. Next, remove the bulb socket from the headlight housing by turning it counterclockwise 45 degrees and pulling it out. To install a new bulb socket, align the lugs on the socket with the slots in the periphery of the mounting hole, insert the bulb socket, and rotate it clockwise until it stops. Installation is the reverse of removal, and once completed, verify that the new headlight bulb operates correctly.

Genuine Honda Crosstour Headlight Bulb

Headlamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Headlight Bulbs found

View related parts
Honda Crosstour Bulb (H11) (12V 55W) (Koito)
Part Number: 33165-SAA-003
$19.93 MSRP: $28.15
You Save: $8.22 (30%)
ADD TO CART
Product Specifications
- Other Name: Low Beam Bulb; Fog Lamp Bulb, Headlamp Bulb, Lower Beam Bulb
- Replaces: 33165-S5A-003
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2015 Honda Crosstour | 5 Door EX, 5 Door EX (2WD), 5 Door EX-L, 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 5AT, KA 6AT
View related parts
Honda Crosstour Bulb, Headlight (Hb3) (12V 60W) (Sylvania)
Part Number: 33115-S84-A01
$15.78 MSRP: $22.28
You Save: $6.50 (30%)
ADD TO CART
Product Specifications
- Other Name: Composite Headlamp
- Replaces: 33103-SL5-A02, 33115-SV4-A10, 33115-SH3-A01, 33115-S84-A11, 33115-SV4-A01, 33116-SH3-A01AH, 33115-TA0-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2015 Honda Crosstour | 5 Door EX, 5 Door EX (2WD), 5 Door EX-L, 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 5AT, KA 6AT

Honda Crosstour Headlight Bulb

Honda Crosstour Headlight Bulb provides bright lighting to ensure that drivers can see the road clearly at night and in fog or rain. The bulb itself is located within the headlight assembly of the vehicle and this is the primary source of light that is activated by controls on the dashboard, and it's the steady beam of light that will increase visibility, helping the Honda model stay safer when natural light levels are low. Because the design is oriented towards dependable illumination, not style changing, all Crosstour since launch has relied on the same Headlight Bulb concept, which means that shoppers will not come across separate generations and conflicting fitments. While materials or minor internal tweaks may evolve, each Honda unit still follows the same exact principle, the Headlight Bulb securely housed up front to send light ahead clearly keeping the Crosstour confident in the dark. This Honda lighting piece has consistency and each Crosstour owner is able to replace the Headlight Bulb quickly as it uses the Headlight Bulb plug connection.

In search of affordable OEM Honda Crosstour Headlight Bulb? Consider browsing through our extensive inventory of genuine Honda Crosstour Headlight Bulb. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Crosstour Headlight Bulb Parts Questions & Experts Answers

Bulb, Headlight (Hb3) (12V 60W) (Sylvania)
33115-S84-A01
Q: How do you replace the low-beam and high-beam headlight bulbs on Honda Crosstour?
A:
To replace the low-beam Headlight bulb, first remove the two forward fasteners securing the inner fender splash shield, then pull the splash shield back for access to the bulb. For V6 models with a manual transmission, also remove the air duct accessible through the inner fender panel. To replace a high-beam bulb on the left (driver's) side, remove the air intake cover from in front of the battery. Disconnect the electrical connector from the headlight by depressing the release lever and pulling off the connector. Next, remove the bulb socket from the headlight housing by turning it counterclockwise 45 degrees and pulling it out. To install a new bulb socket, align the lugs on the socket with the slots in the periphery of the mounting hole, insert the bulb socket, and rotate it clockwise until it stops. Installation is the reverse of removal, and once completed, verify that the new headlight bulb operates correctly.