How do you remove and reinstall the Flywheel on Honda CR-V?

To remove the transaxle, first raise the vehicle and support it securely on jackstands, then proceed to remove the transaxle. If equipped with a manual transaxle, take off the pressure plate and clutch disc, which is also a good time to check or replace the clutch components and pilot bearing. Next, remove the bolts securing the flywheel/driveplate to the crankshaft; if the crankshaft turns, wedge a screwdriver in the ring gear teeth for manual transaxle models or insert a long punch through one of the holes in the driveplate for automatic transaxle models. Carefully remove the flywheel/driveplate from the crankshaft, supporting it while removing the last bolt due to its weight. Clean the flywheel to eliminate grease and oil, inspecting the surface for cracks, rivet grooves, burned areas, and score marks, with light scoring removable using emery cloth. Check for cracked and broken ring gear teeth, laying the flywheel on a flat surface to check for warpage with a straightedge. Clean and inspect the mating surfaces of the flywheel/driveplate and crankshaft, replacing the rear main oil seal if it is leaking before reinstalling the flywheel/driveplate. Position the flywheel/driveplate against the crankshaft, ensuring correct installation with alignment dowels or staggered bolt holes if applicable, and apply thread-locking compound to the bolt threads before tightening them in a criss-cross pattern to the specified torque. The remainder of the installation follows the reverse order of removal.

Genuine Honda CR-V Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Flywheels found

View related parts
Honda CR-V Plate, Drive
Part Number: 26251-PNA-000
$43.44 MSRP: $61.35
You Save: $17.91 (30%)
ADD TO CART
Product Specifications
- Other Name: Drive Plate
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2002-2014 Honda CR-V | 5 Door EX, 5 Door EX (2WD), 5 Door EX (4WD), 5 Door EX (AWD), 5 Door EX-L (2WD), 5 Door EX-L (4WD), 5 Door EX-L (AWD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door LX (AWD), 5 Door SE, 5 Door SE (2WD), 5 Door SE (4WD) | KA 4AT, KA 5AT
View related parts
Honda CR-V Plate, Drive
Part Number: 26251-RJ2-000
$29.45 MSRP: $41.60
You Save: $12.15 (30%)
ADD TO CART
Product Specifications
- Other Name: Drive Plate
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2015-2019 Honda CR-V | 5 Door EX (2WD), 5 Door EX (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door LX (2WD), 5 Door LX (AWD), 5 Door SE (2WD), 5 Door SE (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD) | KA CVT
View related parts
Honda CR-V Flywheel
Part Number: 22100-PNB-003
$500.89 MSRP: $722.78
You Save: $221.89 (31%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2002-2006 Honda CR-V | 5 Door EX, 5 Door EX (4WD), 5 Door LX (4WD) | KA 5MT
View related parts
Honda CR-V Plate, Drive
Part Number: 26251-5Y4-000
$96.65 MSRP: $136.51
You Save: $39.86 (30%)
ADD TO CART
Product Specifications
- Other Name: Drive Plate
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2022 Honda CR-V | Hybrid EX, Hybrid EX-L, Hybrid Touring
Honda CR-V PLATE ASSY-, DRIVE
Part Number: 26250-6GA-000
$185.91 MSRP: $264.83
You Save: $78.92 (30%)
ADD TO CART
Product Specifications
- Other Name: Drive Plate
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2023 Honda CR-V | Hybrid Sport, Hybrid Sport Touring
View related parts
Honda CR-V Plate, Drive
Part Number: 26251-50P-000
$26.36 MSRP: $37.23
You Save: $10.87 (30%)
ADD TO CART
Product Specifications
- Other Name: Drive Plate
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2023 Honda CR-V | 5 Door EX (2WD), 5 Door EX (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door LX (2WD), 5 Door LX (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD), EX, EX-L, LX, Special Edition, Touring | KA CVT
View related parts
Honda CR-V Flywheel
Part Number: 22100-P75-005
Product Specifications
- Replaces: 22100-P75-305, 22100-P54-000, 22100-P75-000, 22100-PR4-010
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1998-2001 Honda CR-V | 5 Door EX, 5 Door LX (4WD) | KA 5MT, KL 5MT
View related parts
Honda CR-V Plate, Drive
Part Number: 26251-P00-J10
Product Specifications
- Other Name: Drive Plate
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1997-2001 Honda CR-V | 5 Door EX, 5 Door LX (2WD), 5 Door LX (4WD), 5 Door SE | KA 4AT, KL 4AT

Honda CR-V Flywheel

In search of affordable OEM Honda CR-V Flywheel? Consider browsing through our extensive inventory of genuine Honda CR-V Flywheel. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda CR-V Flywheel Parts Questions & Experts Answers

Plate, Drive
26251-RJ2-000
Q: How do you remove and reinstall the Flywheel on Honda CR-V?
A: To remove the transaxle, first raise the vehicle and support it securely on jackstands, then proceed to remove the transaxle. If equipped with a manual transaxle, take off the pressure plate and clutch disc, which is also a good time to check or replace the clutch components and pilot bearing. Next, remove the bolts securing the flywheel/driveplate to the crankshaft; if the crankshaft turns, wedge a screwdriver in the ring gear teeth for manual transaxle models or insert a long punch through one of the holes in the driveplate for automatic transaxle models. Carefully remove the flywheel/driveplate from the crankshaft, supporting it while removing the last bolt due to its weight. Clean the flywheel to eliminate grease and oil, inspecting the surface for cracks, rivet grooves, burned areas, and score marks, with light scoring removable using emery cloth. Check for cracked and broken ring gear teeth, laying the flywheel on a flat surface to check for warpage with a straightedge. Clean and inspect the mating surfaces of the flywheel/driveplate and crankshaft, replacing the rear main oil seal if it is leaking before reinstalling the flywheel/driveplate. Position the flywheel/driveplate against the crankshaft, ensuring correct installation with alignment dowels or staggered bolt holes if applicable, and apply thread-locking compound to the bolt threads before tightening them in a criss-cross pattern to the specified torque. The remainder of the installation follows the reverse order of removal.