Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2006-2011 Honda Civic | 2 Door DX, 2 Door EX, 2 Door EX-L, 2 Door LX, 4 Door DX, 4 Door EX, 4 Door EX-L, 4 Door GX, 4 Door LX, 4 Door LX-S, 4 Door MX (Hybrid) | KA 5AT, KA CVT
Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
1988-2000 Honda Civic | 2 Door DX, 2 Door EX, 2 Door EX-S, 2 Door HX, 3 Door CX, 3 Door DX, 3 Door SI, 3 Door VX, 4 Door DX, 4 Door EX, 4 Door LX, 5 Door (Wagovan), 5 Door DX | KA 5MT, KL 5MT, KR 5MT, KW 5MT
Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2005 Honda Civic | 2 Door DX, 2 Door EX, 2 Door HX, 2 Door LX, 4 Door DX, 4 Door DX-VP, 4 Door EX, 4 Door GX, 4 Door LX, 4 Door LX-CAR | KA 4AT, KA 5MT, KA CVT
Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2012-2015 Honda Civic | 2 Door DX, 2 Door EX, 2 Door EX-L, 2 Door LX, 4 Door DX, 4 Door EX, 4 Door EX-L, 4 Door GX, 4 Door HF, 4 Door LX, 4 Door LX (AT), 4 Door MX, 4 Door MX (Hybrid) | KA 5AT, KA CVT, KL 5AT, KL CVT
Other Name: Knob Set, Select *NH1154L* (LEA); Shift Knob
Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2018-2021 Honda Civic | 2 Door EX, 2 Door EX (Turbo), 2 Door EX (Turbo/CVT), 2 Door Sport, 2 Door Sport (CVT), 2 Door Touring, 2 Door Touring (Turbo), 4 Door EX, 4 Door EX (Turbo), 4 Door EX-T, 4 Door EX-TA, 4 Door EX-TL, 4 Door EX-TLA, 4 Door Sport, 4 Door Sport (CVT), 4 Door Touring (Turbo) | KA CVT, KL CVT
Q: How to remove the Shift Knob from a Honda Civic?
A: Pull downward on the lower half of the shift knob to release the clips, and expose the retaining screws. Use a small, flat-tipped screwdriver and remove the bezel from around the shift knob itself. Remove the two screws and remove the shift knob from the shift lever. Installation is reverse of removal. Remove the access panel from the left side of the shifter base. Remove the shift knob harness straps and disconnect the shift knob (O/D switch)harness connector (Identifying the 0/0 switch shift knob harness on CR-V). Remove the two screws and remove the shift knob from the shift lever. Installation is reverse of removal!