What is the purpose and location of the MAF/IAT sensor in Honda Accord, and how is it disconnected and reinstalled?

As a note, 2003 and 2004 SULEV and LX-P 4-cylinder models and all 2005 and later four cylinder models are equipped with an MAF/Intake Manifold Temperature Sensor, which combines the functions of the MAF and Intake Manifold Temperature (IMT) sensors into one unit. The sensor is located on the air filter housing. To disconnect the electrical connector, depress the release tab and disconnect the electrical connector, then remove the retaining screws. Remove the sensor retaining screws and remove the sensor. To reinstall, switch the removal steps going from the last step to the first step.

Genuine Honda Accord Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Mass Air Flow Sensors found

View related parts
Honda Accord Meter, Air Flow
Part Number: 37980-RC0-M01
$207.24 MSRP: $295.21
You Save: $87.97 (30%)
ADD TO CART
Product Specifications
- Other Name: Mass Air Flow Sensor; Air Mass Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2022 Honda Accord | Hybrid, Hybrid EX-L, Hybrid Sport, Hybrid Touring
- 2013-2017 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door EX-L V6, 2 Door LX-S, 2 Door TRN-V6, 2 Door Touring (V6), 4 Door EX, 4 Door EX-L, 4 Door EX-L V6, 4 Door Hybrid, 4 Door LX, 4 Door SE, 4 Door Sport, 4 Door Touring (V6) | KA 6AT, KA 6MT, KA CVT, KL 6AT, KL 6MT, KL CVT
View related parts
Honda Accord Meter Assembly, Air Flow
Part Number: 37980-RNA-A01
$207.27 MSRP: $295.25
You Save: $87.98 (30%)
ADD TO CART
Product Specifications
- Other Name: Mass Air Flow Sensor; Air Mass Sensor
- Replaces: 37980-RV0-A01, 37980-RAD-L11
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2003-2012 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door EX-L V6, 2 Door EX-SUL, 2 Door LX, 2 Door LX-SUL, 2 Door SE, 4 Door DX, 4 Door EX, 4 Door EX-L, 4 Door EX-L V6, 4 Door EX-V6, 4 Door EX-V6 (PZEV), 4 Door LX, 4 Door SE, 4 Door VP | KA 5AT, KA 5MT, KA 6MT, KL 5AT, KL 5MT, KL 6MT
View related parts
Honda Accord Meter Assembly, Air Flow
Part Number: 37980-5BA-A01
$109.27 MSRP: $154.33
You Save: $45.06 (30%)
ADD TO CART
Product Specifications
- Other Name: Mass Air Flow Sensor; Air Mass Sensor
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2018-2024 Honda Accord | 4 Door (2.0 Sport), 4 Door (2.0 Touring), 4 Door EX, 4 Door EX-L, 4 Door EX-L (2.0), 4 Door LX, 4 Door Sport, 4 Door Touring, EX, EX-L, Hybrid EX-L, Hybrid Sport, Hybrid Sport-L, Hybrid Touring, LX, Sport, Sport SE, Touring | KA 6MT, KA CVT, KA XAT
View related parts
Honda Accord Meter Assembly, Air Flow
Part Number: 37980-R11-A02
$232.54 MSRP: $331.24
You Save: $98.70 (30%)
ADD TO CART
Product Specifications
- Other Name: Mass Air Flow Sensor
- Replaced by: 37980-RLF-013
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2008-2012 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door LX, 2 Door LX-S, 4 Door EX, 4 Door EX (PZEV), 4 Door EX-L, 4 Door EX-L (PZEV), 4 Door LX, 4 Door LX (PZEV), 4 Door SE, 4 Door SE (PZEV) | KA 5AT, KA 5MT, KL 5AT, KL 5MT
View related parts
Honda Accord Meter Assembly, Air Flow
Part Number: 37980-RLF-013
$232.54 MSRP: $331.24
You Save: $98.70 (30%)
ADD TO CART
Product Specifications
- Other Name: Air Mass Sensor, Mass Air Flow Sensor
- Replaces: 37980-RLF-003, 37980-R11-A01, 37980-R40-A01, 37980-R11-A02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2008-2012 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door LX, 2 Door LX-S, 4 Door EX, 4 Door EX (PZEV), 4 Door EX-L, 4 Door EX-L (PZEV), 4 Door LX, 4 Door LX (PZEV), 4 Door SE, 4 Door SE (PZEV) | KA 5AT, KA 5MT, KL 5AT, KL 5MT
View related parts
Honda Accord Meter Assembly, Air Flow
Part Number: 37980-RLF-003
$232.54 MSRP: $331.24
You Save: $98.70 (30%)
ADD TO CART
Product Specifications
- Other Name: Mass Air Flow Sensor
- Replaced by: 37980-RLF-013
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2011 Honda Accord | 2 Door EX, 2 Door EX-L, 2 Door LX-S, 4 Door LX | KA 5AT, KA 5MT, KL 5AT, KL 5MT

Honda Accord Mass Air Flow Sensor

The Honda Accord Mass Air Flow Sensor helps record the volume of air drawn into the car engine to enable the engine control unit make the necessary adjustment on the amount of fuel to be injected. Some of the commonly used MAF sensors include Vane Meter and Hot Wire sensors, and each has its strength and weakness. The MAF sensor's main objective is to deliver correct values that cover the whole variety of the engining setting the premier parameters for its further most efficient and intensive functioning. It is critical to perform the work periodically and properly to guarantee efficient work of the Mass Air Flow Sensor in Honda Accord automobiles.

In search of affordable OEM Honda Accord Mass Air Flow Sensor? Consider browsing through our extensive inventory of genuine Honda Accord Mass Air Flow Sensor. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Accord Mass Air Flow Sensor Parts Questions & Experts Answers

Meter Assembly, Air Flow
37980-RNA-A01
Q: What is the purpose and location of the MAF/IAT sensor in Honda Accord, and how is it disconnected and reinstalled?
A: As a note, 2003 and 2004 SULEV and LX-P 4-cylinder models and all 2005 and later four cylinder models are equipped with an MAF/Intake Manifold Temperature Sensor, which combines the functions of the MAF and Intake Manifold Temperature (IMT) sensors into one unit. The sensor is located on the air filter housing. To disconnect the electrical connector, depress the release tab and disconnect the electrical connector, then remove the retaining screws. Remove the sensor retaining screws and remove the sensor. To reinstall, switch the removal steps going from the last step to the first step.