Honda 52306-TA1-A02 Bush, Rear Stabilizer Holder

You can Select Your Vehicle to check if 52306-TA1-A02 fits your vehicle.

Loosen the rear wheel lug nuts, raise the rear of the vehicle, place it securely on jackstands and remove the rear wheels. Remove the stabilizer bar-to-link nuts. Use an Allen wrench to prevent the ballstud from turning when removing the attaching link nut. Unbolt the bushing bracket from each side of the stabilizer bar and then remove the bar. Pull the retainers off the bar and inspect the bushings for cracks, breaks and other signs of deterioration. If the bushings are damaged, replace them. Also check the stabilizer bar links for loose balljoints and other damage, replacing them if necessary. Installation is the reverse of removal. Use new self-locking nuts to attach the stabilizer bar links.

Remove the rear wheels.

The stabilizer bar bushing bracket bolts can be accessed through the wheel wells. They should be removed in order to detach the stabilizer bar from the vehicle.

To replace damaged stabilizer bar bushings, the bracket needs to be removed. The bushing slit should be opened and the bushing peeled from the stabilizer bar. The new bushings should be installed with the slits facing the same way as the original bushing slits.