How to replace the steering gear boot on a Honda Ridgeline?

Loosen the lug nuts, raise the front of the vehicle and support it securely on jack stands. Remove the wheel. Remove the tie-rod end and jam nut. Remove the rack and pinion boot clamps (the outer one can be removed with pliers; the inner one must be cut off) and slide the boot off. Before installing the new boot, wrap the threads and serrations on the end of the steering rod with a layer of tape so the small end of the new boot isn't damaged. Slide the new boot into position on the rack and pinion until it seats in the groove in the steering rod and install new clamps. Remove the tape and install the tie-rod end. Install the wheel and lug nuts. Lower the vehicle and tighten the lug nuts to the torque.

Genuine Honda Ridgeline Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Rack and Pinion Boots found

View related parts
Honda Ridgeline Boot, Tie Rod End
Part Number: 53546-STX-A02
$5.37 MSRP: $7.58
You Save: $2.21 (30%)
ADD TO CART
Product Specifications
- Other Name: Outer Tie Rod Dust Cap
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2023 Honda Ridgeline | 4 Door Black, 4 Door RT (2WD), 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (2WD), 4 Door RTL (AWD), 4 Door RTS (2WD), 4 Door RTS (AWD), 4 Door Sport (2WD), 4 Door Sport (AWD), Black Edition, RTL, RTL-E, Sport | KA 6AT, KA 9AT
- 2009-2014 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door Sport | KA 5AT
View related parts
Honda Ridgeline Boot, Tie Rod End
Part Number: 53546-S3V-A02
$11.13 MSRP: $15.71
You Save: $4.58 (30%)
ADD TO CART
Product Specifications
- Other Name: Outer Tie Rod Dust Cap; Dust Cover
- Replaces: 53546-S3V-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2008 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door RTX | KA 5AT
View related parts
Honda Ridgeline Dust Seal, Tie Rod
Part Number: 53534-SJC-A01
$5.89 MSRP: $8.31
You Save: $2.42 (30%)
ADD TO CART
Product Specifications
- Other Name: Tie Rod Boot; Boot
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2014 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door RTX, 4 Door Sport | KA 5AT
View related parts
Honda Ridgeline Dust Seal Set, Tie Rod
Part Number: 53429-T6Z-A01
$19.20 MSRP: $27.12
You Save: $7.92 (30%)
ADD TO CART
Product Specifications
- Other Name: Boot, Tie Rod Boot
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2023 Honda Ridgeline | 4 Door Black, 4 Door RT (2WD), 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (2WD), 4 Door RTL (AWD), 4 Door RTS (2WD), 4 Door RTS (AWD), 4 Door Sport (2WD), 4 Door Sport (AWD), Black Edition, RTL, RTL-E, Sport | KA 6AT, KA 9AT

Honda Ridgeline Rack and Pinion Boot

Honda Ridgeline always incorporate Rack and Pinion Boot that is vital to protecting the steering rack from dirt and other contaminants. This rubber part creates a barrier at both the ends of the rack to avoid exposing the internal parts to dust and moisture. This of course means that if the Rack and Pinion Boot is cracked or damaged in some way you would find that the rack and pinion system would be more susceptible to failure. Like any other automobiles, the Honda Ridgeline models of the past years have had different styles of Rack and Pinion Boot, however, variation is unknown. The primary function remains consistent: to protect the steering system from intrusion of various debris which may interfere with the reliability of the system. Rack and Pinion Boot must be maintained well in order for the Honda Ridgeline to have the prime mechanically steering system.

In search of affordable OEM Honda Ridgeline Rack and Pinion Boot? Consider browsing through our extensive inventory of genuine Honda Ridgeline Rack and Pinion Boot. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Ridgeline Rack and Pinion Boot Parts Questions & Experts Answers

Boot, Tie Rod End
53546-STX-A02
Q: How to replace the steering gear boot on a Honda Ridgeline?
A: Loosen the lug nuts, raise the front of the vehicle and support it securely on jack stands. Remove the wheel. Remove the tie-rod end and jam nut. Remove the rack and pinion boot clamps (the outer one can be removed with pliers; the inner one must be cut off) and slide the boot off. Before installing the new boot, wrap the threads and serrations on the end of the steering rod with a layer of tape so the small end of the new boot isn't damaged. Slide the new boot into position on the rack and pinion until it seats in the groove in the steering rod and install new clamps. Remove the tape and install the tie-rod end. Install the wheel and lug nuts. Lower the vehicle and tighten the lug nuts to the torque.