Genuine Honda Ridgeline Engine

Honda Ridgeline Engine Parts Questions & Answers

• General Assy., Cylinder Block
  10002-RJE-A12
  Q: What items and steps are necessary before beginning engine reassembly for the Honda Ridgeline?

  A: Before the engine is put back together, you will need to have various parts, such as new ones, gaskets, seals, hand tools, a torque wrench, engine oil, gasket sealant, and thread locking compound. Cylinder heads should be installed if there is a short block. Also, there has to be an oil pump, oil pan as well as a water pump. Install external components in this order: thermostat, housing cover, water pump, manifolds, fuel injection, emission control spark plugs ignition coils oil filter engine mounts mount brackets drive plate.
• General Assy., Cylinder Block
  10002-RJE-A12
  Q: How to remove the engine on the Honda Ridgeline?

  A: It is complicated to remove the engine in these models, and this is more so for people who are not professionals. The reason is that the manufacturer recommends a frame contact hoist to be used in removing the engine together with the transaxle. These processes include; lifting an automobile, disengaging electrical elements, extracting the air filter box, unfastening hoses, disconnecting the power steering system, draining fluids, dismantling the exhaust system and axles. Furthermore, it requires special attention when supporting powertrain as well as removing subframe and disconnecting transaxle from the engine. On reassembling the parts one should check the mounts' condition; ensure correct alignment of subframe marks and also ensure there are no leaks.
• General Assy., Cylinder Block
  10002-RJE-A12
  Q: What are the preliminary steps to take when deciding to remove an engine for overhaul or major repair work on the Honda Ridgeline?

  A: Carefully read all procedures before removing an engine for overhaul or repair. Engines can be removed by lowering them to the floor using a transaxle, which demands a vehicle and an engine hoist. A perfect workplace with a store, preferably a flat clean surface will be appropriate. Always start by cleaning the engine compartment. It is important to have someone who knows safety assist you in case you do not know what you are doing. Ensure that all needed tools and equipments are ready and the car is expected to be unused over a period of time. Consult the machine shop for an estimate on any work that you cannot do yourself.
• General Assy., Cylinder Block
  10002-RJE-A03
  Q: How to remove external components from an engine for the Honda Ridgeline?

  A: It's much easier to remove the external components if the engine is mounted on a portable engine stand, which can often be rented quite cheaply from an equipment rental yard. Before the engine is mounted on a stand, the driveplate should be removed from the engine. If a stand isn't available, it's possible to remove the external engine components with it blocked up on the floor, but be extra careful not to tip or drop the engine when working without a stand. If you're going to obtain a rebuilt engine, all external components must come off first, to be transferred to the replacement engine. These components include the driveplate, ignition system components, emissions-related components, engine mounts and mount brackets, engine rear cover, intake/exhaust manifolds, fuel injection components, oil filter, spark plugs, thermostat and housing assembly, and water pump. When removing the external components from the engine, pay close attention to details that may be helpful or important during installation. Note the installed position of gaskets, seals, spacers, pins, brackets, washers bolts and other small items. If you're going to obtain a short block, then remove the timing belt, cylinder heads, oil pan, oil pump pick-up tube, oil pump and water pump from your engine so that you can turn in your old short block to the rebuilder as a core. Engine rebuilding alternatives provide additional information regarding the different possibilities to be considered.