How to replace the EGR Valve for the Honda Ridgeline?

First of all, the EGR system cools these by recirculating exhaust gases into the combustion chambers. It contains several components including sensors, EGR valve, and PCM. It is responsible for determining or rather deciding on the most appropriate height required for lifting the EGR valve. The current flow to the EGR valve is adjusted by the PCM depending on specific conditions experienced while operating. To replace this, remove the engine cover, disconnect the electrical connector, remove the valve and old gasket. For installation, install a new valve and gasket.

Genuine Honda Ridgeline EGR Valve

Emissions EGR Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 EGR Valves found

View related parts
Honda Ridgeline Valve Set, EGR
Part Number: 18011-R70-A00
$151.60 MSRP: $215.96
You Save: $64.36 (30%)
ADD TO CART
Product Specifications
- Other Name: EGR Valve
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2009-2014 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door Sport | KA 5AT
View related parts
Honda Ridgeline Valve Set, EGR
Part Number: 18011-R1A-A00
$183.39 MSRP: $261.24
You Save: $77.85 (30%)
ADD TO CART
Product Specifications
- Other Name: EGR Valve
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2023 Honda Ridgeline | 4 Door Black, 4 Door RT (2WD), 4 Door RT (AWD), 4 Door RTL, 4 Door RTL (2WD), 4 Door RTL (AWD), 4 Door RTS (2WD), 4 Door RTS (AWD), 4 Door Sport (2WD), 4 Door Sport (AWD), Black Edition, RTL, RTL-E, Sport | KA 6AT, KA 9AT
View related parts
Honda Ridgeline Valve Set, EGR
Part Number: 18011-RCA-A00
$252.99 MSRP: $360.38
You Save: $107.39 (30%)
ADD TO CART
Product Specifications
- Other Name: EGR Valve
- Replaces: 18011-P8A-A00, 18011-PGE-A00, 18011-PXK-020, 18011-PXK-030, 18011-P8C-A00
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2008 Honda Ridgeline | 4 Door RT, 4 Door RTL, 4 Door RTS, 4 Door RTX | KA 5AT

Honda Ridgeline EGR Valve

The EGR Valve located in Honda Ridgeline automobiles helps in controlling the circulation of the back pressure of Exhaust Gas within the combustion chamber, which helps in suppressing nitrogen oxide (NOx) emission. Through a part of the exhaust gas circulation, the EGR Valve reduces oxygen content and adds inert gases that assist in the absorption of combustion heat and reduction of peak temperatures that cause the formation of NOx. In addition to helping to provide compliance with emissions legislation, this mechanism also improves fuel economy by enabling greater values of throttle and reducing pumping loss. In the years of engineering development on the Honda Ridgeline, Honda has incorporated different types of EGR Valves from simple orifice jets to the progressive EGR Valves that feature operations that are conditioned by parameters such as coolant temperature and manifold vacuum. Present-day EGR systems may incorporate backpressure transducers for the purpose of controlling flow in accordance with load experienced by the engine. However, EGR Valves can become blocked with carbons and therefore they should be cleaned to ensure they operate as they're expected within the Honda Ridgeline.

In search of affordable OEM Honda Ridgeline EGR Valve? Consider browsing through our extensive inventory of genuine Honda Ridgeline EGR Valve. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Ridgeline EGR Valve Parts Questions & Experts Answers

Valve Set, EGR
18011-RCA-A00
Q: How to replace the EGR Valve for the Honda Ridgeline?
A: First of all, the EGR system cools these by recirculating exhaust gases into the combustion chambers. It contains several components including sensors, EGR valve, and PCM. It is responsible for determining or rather deciding on the most appropriate height required for lifting the EGR valve. The current flow to the EGR valve is adjusted by the PCM depending on specific conditions experienced while operating. To replace this, remove the engine cover, disconnect the electrical connector, remove the valve and old gasket. For installation, install a new valve and gasket.