×
- Live Chat
- 1-888-984-2011
My Garage
My Account
Cart
Genuine Honda Prelude Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
27 Intake Manifolds found
Honda Prelude Manifold Assembly B, Intake
Part Number: 17010-P5M-A00$303.39 MSRP: $432.20You Save: $128.81 (30%)
Honda Prelude Manifold, Intake
Part Number: 17100-PK1-660$377.72 MSRP: $538.07You Save: $160.35 (30%)
Honda Prelude Manifold A, Intake
Part Number: 17100-PK2-660$377.72 MSRP: $538.07You Save: $160.35 (30%)
| Page 1 of 2 |Next >
1-20 of 27 Results
About Honda Prelude Intake Manifold
A Honda Prelude needs to be kept in good working condition in your vehicle. The online catalog we provide will get you through the ordering process safely and securely. All genuine Honda Intake Manifolds from us are shipped directly from authorized Honda Dealer. If you want search for Honda Intake Manifold fast and easily, just come to Hondapartsnow.com to look for your parts.
Honda Prelude Intake Manifold Parts Questions & Experts Answers
- Q: How do you remove and install the intake manifold on Honda Prelude?A: For the removal and installation of the intake manifold for various engines follow the steps, The first step should be to turn off the vehicle engine and remove the negative terminal of the battery, finally drain the engine coolant in a jug. Remove cooling hoses, vacuum hoses and electrical connectors; drop the fuel rail and injectors on 2.2L and 2.3L engines. If possible purchase or borrow a thermostat housing removal tool or remove the upper intake manifold plenum to make it easy. In this section, it is also possible to note some amount of carbon deposits at the bottom side of the intake manifold After that clean up all the gasket surfaces and install a new gasket After that install the manifold nuts while crossing them to make sure that the tension between the new gasket and the engine block as well as between the new gasket and the intake manifold is balanced. For 2.7L engines, the following steps are also followed, disconnecting several hoses and electrical connections, removing the fuel rail and injectors, positioning new gaskets and components properly. For 3.0 L, Connect to the radio to get its security code, then disconnect the battery; drain the coolant; and-in preparation to unbolting the intake manifold-remove other components as necessary. While installing always ensure that the equipment and surface are clean, the gaskets are new and all the connections are tight. As a result of the installation, the cooling system should be refilled, battery connected back, and search for any leaks.
Related Honda Prelude Parts
Browse by Year
2001 Intake Manifold 2000 Intake Manifold 1999 Intake Manifold 1998 Intake Manifold 1997 Intake Manifold 1996 Intake Manifold 1995 Intake Manifold 1994 Intake Manifold 1993 Intake Manifold 1992 Intake Manifold 1991 Intake Manifold 1990 Intake Manifold 1989 Intake Manifold 1988 Intake Manifold 1987 Intake Manifold 1986 Intake Manifold 1985 Intake Manifold 1984 Intake Manifold 1983 Intake Manifold 1982 Intake Manifold 1981 Intake Manifold 1980 Intake Manifold 1979 Intake Manifold