How to remove and install a distributor cap and Rotor for the Honda Prelude?

Before you take off the distributor cap, make sure to mark the positions of the wires. Unscrew the bolts that hold the cap and then pull out the rotor. Record down your radios security code as you disconnect the battery. Remove ignition wires from both the cap and distributor cap itself. You should look for any damage on the seal or cap. Now place that rotor into its shaft and put back that cap in its housing. Tighten them using a crisscross pattern of fasteners. Then, reattach wires and batteries and punch in radio code numbers too. Replace them if they are cracked or their electrodes are worn out and clean before reinstalling them.

Genuine Honda Prelude Distributor Cap

Ignition Distributor Cap

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Distributor Caps found

View related parts
Honda Prelude Cap Assembly
Part Number: 30102-PT3-A12
$33.71 MSRP: $47.62
You Save: $13.91 (30%)
ADD TO CART
Product Specifications
- Other Name: Distributor Cap; Cap
- Replaces: 30102-P12-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1992-2001 Honda Prelude | 2 Door Base, 2 Door S, 2 Door SI, 2 Door Sivtec, 2 Door TYPESH | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Cap Assembly, Distributor
Part Number: 30102-PC6-005
Product Specifications
- Other Name: Cap
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1983-1990 Honda Prelude | 2 Door 2.0S, 2 Door DX | KA 4AT, KA 5MT, KH 4AT, KH 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Cap Assembly, Distributor
Part Number: 30102-PA0-005
Product Specifications
- Other Name: Cap
- Replaces: 30102-634-005
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1979-1982 Honda Prelude | 2 Door ** | KA 5MT, KA HMT, KH 5MT, KH HMT, KL 5MT, KL HMT
View related parts
Honda Prelude Cap Assembly, Distributor
Part Number: 30102-PA1-732
Product Specifications
- Replaces: 30102-PC1-004
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1982 Honda Prelude | 2 Door ** | KA 5MT, KA HMT, KH 5MT, KH HMT, KL 5MT, KL HMT
View related parts
Honda Prelude Cap Assembly, Distributor
Part Number: 30102-PC6-006
Product Specifications
- Other Name: Cap
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1983 Honda Prelude | 2 Door DX | KA 4AT, KA 5MT, KH 4AT, KH 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Cap Assembly, Distributor
Part Number: 30102-PC7-662
Product Specifications
- Other Name: Cap
- Replaces: 30102-PC7-661
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1984-1987 Honda Prelude | 2 Door DX | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Cap Assembly
Part Number: 30102-PK1-006
Product Specifications
- Other Name: Cap
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1988-1990 Honda Prelude | 2 Door 2.0S | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Cap Assembly, Distributor (Tec)
Part Number: 30102-PJ0-662
Product Specifications
- Other Name: Cap
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1985-1987 Honda Prelude | 2 Door SI | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Prelude Cap Assembly
Part Number: 30102-PK2-006
Product Specifications
- Other Name: Cap
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1988-1991 Honda Prelude | 2 Door 2.05SI, 2 Door 2.0SI | KA 4AT, KA 5MT, KL 4AT, KL 5MT

Honda Prelude Distributor Cap

Distributor Cap of Honda Prelude vehicles is one of the vital component serving in the ignition system and protects inner part along with delivering current from the ignition coil to the spark plug wires. Within it are post that will pertain to each engine cylinder and may include modification such as two spark plugs per cylinder or a wasted spark. The rotor which is connected to the camshaft rotates beneath the cap and provides the electricity to the spark plugs in the proper sequence. Daily inspection and close monitoring of the condition of the distributor cap as has been emphasized earlier can help avoid the failure of the engine especially when the cap is wrapped with plastic that could be more vulnerable in regions that experience very cold weather. In conclusion, the distributor cap is an essential, yet simple component that is needed for efficient operation of the vehicle's engine in Hond Prelude automobiles.

In search of affordable OEM Honda Prelude Distributor Cap? Consider browsing through our extensive inventory of genuine Honda Prelude Distributor Cap. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Prelude Distributor Cap Parts Questions & Experts Answers

Cap Assembly
30102-PT3-A12
Q: How to remove and install a distributor cap and Rotor for the Honda Prelude?
A: Before you take off the distributor cap, make sure to mark the positions of the wires. Unscrew the bolts that hold the cap and then pull out the rotor. Record down your radios security code as you disconnect the battery. Remove ignition wires from both the cap and distributor cap itself. You should look for any damage on the seal or cap. Now place that rotor into its shaft and put back that cap in its housing. Tighten them using a crisscross pattern of fasteners. Then, reattach wires and batteries and punch in radio code numbers too. Replace them if they are cracked or their electrodes are worn out and clean before reinstalling them.