How to replace the steering gear boot on a Honda Pilot?

Loosen the lug nuts, raise the front of the vehicle and support it securely on jack stands. Remove the wheel. Remove the tie-rod end and jam nut. Remove the rack and pinion boot clamps (the outer one can be removed with pliers; the inner one must be cut off) and slide the boot off. Before installing the new boot, wrap the threads and serrations on the end of the steering rod with a layer of tape so the small end of the new boot isn't damaged. Slide the new boot into position on the rack and pinion until it seats in the groove in the steering rod and install new clamps. Remove the tape and install the tie-rod end. Install the wheel and lug nuts. Lower the vehicle and tighten the lug nuts to the torque.

Genuine Honda Pilot Rack and Pinion Boot

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Model --

-- Select Year --

-- Select Body & Trim --

-- Select Emission & Transmission --

5 Rack and Pinion Boots found

View related parts
Honda Pilot Dust Seal, Tie Rod
Part Number: 53534-SZA-A02
- Other Name: Tie Rod Boot; Boot
$3.15 MSRP: $4.45
You Save: $1.30 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2009-2015 Honda Pilot | 5 Door EX (2WD), 5 Door EX (4WD), 5 Door EX 4.4 (4WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door LX 4.2 (4WD), 5 Door SE (2WD), 5 Door SE (4WD), 5 Door Touring (2WD), 5 Door Touring (4WD) | KA 5AT
Less Info
View related parts
Honda Pilot Boot, Tie Rod End
Part Number: 53546-STX-A02
- Other Name: Outer Tie Rod Dust Cap
$5.23 MSRP: $7.39
You Save: $2.16 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2009-2021 Honda Pilot | 5 Door Black (AWD), 5 Door ELITE (AWD), 5 Door EX (2WD), 5 Door EX (4WD), 5 Door EX (AWD), 5 Door EX 4.4 (4WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD), 5 Door EX-L (AWD), 5 Door LX (2WD), 5 Door LX (4WD), 5 Door LX (AWD), 5 Door LX 4.2 (4WD), 5 Door SE (2WD), 5 Door SE (4WD), 5 Door SE (AWD), 5 Door Touring (2WD), 5 Door Touring (4WD), 5 Door Touring (AWD) | KA 5AT, KA 6AT, KA 9AT
Less Info
View related parts
Honda Pilot Dust Seal, Tie Rod
Part Number: 53534-S3V-A01
- Other Name: Tie Rod Boot; Boot
$20.74 MSRP: $29.31
You Save: $8.57 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2003-2008 Honda Pilot | 5 Door EX, 5 Door EX (2WD), 5 Door EX (4WD), 5 Door EX-L, 5 Door EX-L (2WD), 5 Door EX-L (4WD), 5 Door EX-SE (2WD), 5 Door EX-SE (4WD), 5 Door LX, 5 Door LX (2WD), 5 Door LX (4WD), 5 Door LX-VP (2WD), 5 Door LX-VP (4WD) | KA 5AT, KL 5AT
Less Info
View related parts
Honda Pilot Boot, Tie Rod End
Part Number: 53546-S3V-A02
- Other Name: Outer Tie Rod Dust Cap
- Replaces: 53546-S3V-A01
$10.84 MSRP: $15.31
You Save: $4.47 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2003-2008 Honda Pilot | 5 Door EX, 5 Door EX (2WD), 5 Door EX (4WD), 5 Door EX-L, 5 Door EX-L (2WD), 5 Door EX-L (4WD), 5 Door EX-SE (2WD), 5 Door EX-SE (4WD), 5 Door LX, 5 Door LX (2WD), 5 Door LX (4WD), 5 Door LX-VP (2WD), 5 Door LX-VP (4WD) | KA 5AT, KL 5AT
Less Info
View related parts
Honda Pilot Dust Seal Set, Tie Rod
Part Number: 53429-TG7-A01
- Other Name: Tie Rod Boot; Boot
$19.23 MSRP: $27.16
You Save: $7.93 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2016-2021 Honda Pilot | 5 Door Black (AWD), 5 Door ELITE (AWD), 5 Door EX (2WD), 5 Door EX (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door LX (2WD), 5 Door LX (AWD), 5 Door SE (2WD), 5 Door SE (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD) | KA 6AT, KA 9AT
Less Info

Honda Pilot Rack and Pinion Boot Parts Questions & Answers

Boot, Tie Rod End
53546-S3V-A02
Q: How to replace the steering gear boot on a Honda Pilot?
A: Loosen the lug nuts, raise the front of the vehicle and support it securely on jack stands. Remove the wheel. Remove the tie-rod end and jam nut. Remove the rack and pinion boot clamps (the outer one can be removed with pliers; the inner one must be cut off) and slide the boot off. Before installing the new boot, wrap the threads and serrations on the end of the steering rod with a layer of tape so the small end of the new boot isn't damaged. Slide the new boot into position on the rack and pinion until it seats in the groove in the steering rod and install new clamps. Remove the tape and install the tie-rod end. Install the wheel and lug nuts. Lower the vehicle and tighten the lug nuts to the torque.