How do you replace the oil cooler in the Honda Passport?

While replacing the oil cooler of a 3.2L V6, drain the cooling system by taking off the oil filter. Pull off hoses from the oil pressure sending unit and cooler's electrical connector. Make use of the socket to remove the threaded adapter that holds oil cooler housing. Remove the oil cooler from the adapter. Take it out if you are replacing oil cooler connector and cleanse the block as well as old gasket material from the adapter. Place new gasket and adapter and clear coolant sealing surface and add an O-ring on it. Apply thread-locking compound on the threaded tube and tighten it in place. Reinstall everything, replace the oil filter, refill the cooling system, check for leaks.

Genuine Honda Passport Oil Cooler

Engine Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Oil Coolers found

View related parts
Honda Passport Cooler & Pipes Kit, Oil
Part Number: 06224-5J4-010
$345.00 MSRP: $491.44
You Save: $146.44 (30%)
ADD TO CART
Product Specifications
- Other Name: Oil Cooler
- Replaces: 06224-5J4-000
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2019-2021 Honda Passport | 5 Door ELITE (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door Sport (2WD), 5 Door Sport (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD) | KA 9AT
View related parts
Honda Passport Cooler Assembly, Oil
Part Number: 8-97118-508-1
Product Specifications
- Other Name: Oil Cooler
- Replaces: 8-97118-508-0
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1995-1997 Honda Passport | 4 Door EX-W (4X2 V6), 4 Door EX-W (4X4 V6), 4 Door LX (4X2 V6), 4 Door LX (4X4 V6), 4 Door LX-W (4X4 V6) | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Passport Cooler Assembly, Oil
Part Number: 8-97061-015-2
Product Specifications
- Replaces: 8-97061-015-1
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1994-1995 Honda Passport | 4 Door EX (4X4 V6), 4 Door EX-W (4X4 V6), 4 Door LX (4X2 V6), 4 Door LX (4X4 V6), 4 Door LX-W (4X4 V6) | KA 4AT, KA 5MT, KL 4AT, KL 5MT

Honda Passport Oil Cooler

The Oil Cooler as a component, located in the Honda Passport cars, serves to keep the viscosity of oil in the engine at the right level to keep it from degrading when exposed to high temperatures. Usually these oil 'cooler' are oil to water cooler incorporated into the vehicles cooling system for effective control of oil temperature. The factory cooler works well at standard operating conditions, but when exposed to high pressure such as towing in very hot climates the system becomes stressed. In such situations, one can safely enhance his/her car by incorporating oil cooler kits since they assist in avoiding oil contamination and at the same time increase the durability of both the oil and the engine.

In search of affordable OEM Honda Passport Oil Cooler? Consider browsing through our extensive inventory of genuine Honda Passport Oil Cooler. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Passport Oil Cooler Parts Questions & Experts Answers

Cooler Assembly, Oil
8-97061-015-2
Q: How do you replace the oil cooler in the Honda Passport?
A: While replacing the oil cooler of a 3.2L V6, drain the cooling system by taking off the oil filter. Pull off hoses from the oil pressure sending unit and cooler's electrical connector. Make use of the socket to remove the threaded adapter that holds oil cooler housing. Remove the oil cooler from the adapter. Take it out if you are replacing oil cooler connector and cleanse the block as well as old gasket material from the adapter. Place new gasket and adapter and clear coolant sealing surface and add an O-ring on it. Apply thread-locking compound on the threaded tube and tighten it in place. Reinstall everything, replace the oil filter, refill the cooling system, check for leaks.