Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2019-2023 Honda Passport | 5 Door ELITE (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door Sport (2WD), 5 Door Sport (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD), EX-L, Elite, Sport, Touring, TrailSport | KA 9AT
Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2019-2023 Honda Passport | 5 Door ELITE (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door Sport (2WD), 5 Door Sport (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD), EX-L, Elite, Sport, Touring, TrailSport | KA 9AT
Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2019-2023 Honda Passport | 5 Door ELITE (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door Sport (2WD), 5 Door Sport (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD), EX-L, Elite, Sport, Touring, TrailSport | KA 9AT
Other Name: Trans Mount; Mount, Transmission Mount
Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2019-2023 Honda Passport | 5 Door ELITE (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door Sport (2WD), 5 Door Sport (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD), EX-L, Elite, Sport, Touring, TrailSport | KA 9AT
Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2019-2023 Honda Passport | 5 Door ELITE (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door Sport (2WD), 5 Door Sport (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD), EX-L, Elite, TrailSport | KA 9AT
Warranty: This genuine part is guaranteed by Honda's
factory warranty.
Fits the following Vehicles:
2019-2023 Honda Passport | 5 Door ELITE (AWD), 5 Door EX-L (2WD), 5 Door EX-L (AWD), 5 Door Sport (2WD), 5 Door Sport (AWD), 5 Door Touring (2WD), 5 Door Touring (AWD), EX-L, Elite, TrailSport | KA 9AT
Q: How do you check the transmission mount for wear and replace it on Honda Passport?
A: To check the transmission mount for wear, raise the vehicle and place it securely on jackstands. Insert a large screwdriver or pry bar into the space between the extension housing and the crossmember, attempting to pry the transmission up slightly; the transmission should not move away from the insulator much at all. For replacement, first remove the skidplate by taking out the bolts. Next, remove the nuts that attach the mount to the crossmember. Then, raise the transmission slightly with a jack and remove the bolts from the insulator, noting the holes used in the crossmember for proper alignment during installation. Installation follows the reverse of the removal procedure, ensuring that the nuts and bolts are tightened securely.