How to check and replace the cooling fan assembly if it is faulty for the Honda Odyssey?

All models have two complete fan circuits - one for the condenser and one for the radiator. If the engine is overheating and the cooling fan assembly is not activating when the engine temperature is high, first check all fuses. If they are intact, unplug the fan motor electrical connector. To test either fan motor, disconnect the connector and use jumper wires to power the fan directly from the battery. If the fan doesn't function, replace the motor. Make sure to also test the condenser fan motor. If the radiator fan motor is working, but not activating when the engine heats up, it might be a relay issue. Locate the fan relays in the engine compartment fuse/relay box. Test the relay, and if they're functioning, test the radiator fan switches. These switches, based on engine temperature, control the fan operations. They can be checked using an ohmmeter. If all components are operational, inspect all wiring and connections to the fan motors. For replacement on models from 2004 and before: Disconnect the cable from the negative battery terminal. Secure the vehicle, raise the front, and remove the lower splash pan from beneath the radiator. Take off the radiator cover, drain the cooling system, and if the coolant is still good, it can be reused. Remove the wiring harness clamp, vacuum hose, and radiator bracket. Extract the battery and battery tray, and disconnect the fan wiring connectors. Remove both the upper and lower radiator hoses. Disconnect the automatic transaxle hoses from the radiator. Remove the radiator and condenser brackets. For 2005 and later models: Disconnect the breather hose and air intake duct. Remove the battery and tray. Depending on the model year, either remove the grille top cover or the front bumper cover. Disconnect any interfering hoses, wiring, and clamps. Remove the coolant reservoir.For all models: Extract the upper bolts and slightly loosen the lower bolts of each fan shroud. Lift the fan(s) from the engine compartment. To separate the fan from the motor, remove the motor shaft nut. To detach the fan motor from the shroud, remove the mounting screws. Installation is the reverse of the removal process. Lastly, reconnect the battery.

Genuine Honda Odyssey Cooling Fan Assembly

Engine Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Cooling Fan Assemblys found

View related parts
Honda Odyssey Fan, Cooling
Part Number: 19020-RV0-A01
$25.17 MSRP: $35.55
You Save: $10.38 (30%)
ADD TO CART
Product Specifications
- Other Name: Fan Blade
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2011-2024 Honda Odyssey | 5 Door ELITE (10AT), 5 Door EX, 5 Door EX (10AT), 5 Door EX-L, 5 Door EX-L (10AT), 5 Door LX, 5 Door LX (10AT), 5 Door SE, 5 Door Touring, 5 Door Touring (10AT), EX, EX-L, Elite, Sport, Touring | KA 5AT, KA 6AT, KA 9AT, KA XAT
View related parts
Honda Odyssey Fan, Cooling
Part Number: 38611-RV0-A01
$25.32 MSRP: $35.77
You Save: $10.45 (30%)
ADD TO CART
Product Specifications
- Other Name: Fan Blade
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2011-2024 Honda Odyssey | 5 Door ELITE (10AT), 5 Door EX, 5 Door EX (10AT), 5 Door EX-L, 5 Door EX-L (10AT), 5 Door LX, 5 Door LX (10AT), 5 Door SE, 5 Door Touring, 5 Door Touring (10AT), EX, EX-L, Elite, Sport, Touring | KA 5AT, KA 6AT, KA 9AT, KA XAT
View related parts
Honda Odyssey Fan, Cooling
Part Number: 19020-RGL-A01
$74.33 MSRP: $104.98
You Save: $30.65 (30%)
ADD TO CART
Product Specifications
- Other Name: Fan Blade
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2005-2010 Honda Odyssey | 5 Door EX, 5 Door EX-L, 5 Door EXL-T, 5 Door LX | KA 5AT
View related parts
Honda Odyssey Fan, Cooling (Mitsuba)
Part Number: 38611-P8F-A01
$48.25 MSRP: $68.14
You Save: $19.89 (30%)
ADD TO CART
Product Specifications
- Other Name: Fan Blade; Blade
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1999-2004 Honda Odyssey | 5 Door EX, 5 Door EX-L, 5 Door LX, 5 Door VAN | KA 4AT, KA 5AT
View related parts
Honda Odyssey Fan, Cooling
Part Number: 38611-RGL-A01
$74.33 MSRP: $104.98
You Save: $30.65 (30%)
ADD TO CART
Product Specifications
- Other Name: Fan Blade
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2005-2010 Honda Odyssey | 5 Door EX, 5 Door EX-L, 5 Door EXL-T, 5 Door LX | KA 5AT
View related parts
Honda Odyssey Fan, Cooling (Mitsuba)
Part Number: 38611-PAA-A01
$27.90 MSRP: $39.40
You Save: $11.50 (30%)
ADD TO CART
Product Specifications
- Other Name: Fan Blade
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1998 Honda Odyssey | 5 Door EX, 5 Door LX (6 Seats), 5 Door LX (7 Seats) | KA 4AT
View related parts
Honda Odyssey Fan, Cooling
Part Number: 19020-P8F-A01
$57.75 MSRP: $81.57
You Save: $23.82 (30%)
ADD TO CART
Product Specifications
- Other Name: Fan Blade; Blade
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1999-2004 Honda Odyssey | 5 Door EX, 5 Door EX-L, 5 Door LX, 5 Door VAN | KA 4AT, KA 5AT
View related parts
Honda Odyssey Fan, Cooling (Mitsuba)
Part Number: 38611-PT2-J02
$58.53 MSRP: $82.66
You Save: $24.13 (30%)
ADD TO CART
Product Specifications
- Other Name: Fan Blade; Blade
- Replaces: 38611-P7J-J01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1995-1997 Honda Odyssey | 5 Door EX, 5 Door LX (6 Seats), 5 Door LX (7 Seats) | KA 4AT
View related parts
Honda Odyssey Fan, Cooling
Part Number: 19020-P1E-003
$42.99 MSRP: $70.43
You Save: $27.44 (39%)
ADD TO CART
Product Specifications
- Other Name: Fan Blade; Blade
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1995-1997 Honda Odyssey | 5 Door EX, 5 Door LX (6 Seats), 5 Door LX (7 Seats) | KA 4AT
View related parts
Honda Odyssey Fan, Cooling
Part Number: 19020-PEA-003
Product Specifications
- Other Name: Fan Blade; Blade
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1998 Honda Odyssey | 5 Door EX, 5 Door LX (6 Seats), 5 Door LX (7 Seats) | KA 4AT

Honda Odyssey Cooling Fan Assembly

The Cooling Fan Assembly is used in Honda Odyssey automobiles to ensure that the engine's temperature is well monitored since it circulating the air across the radiator. This assembly may consist of a fan blade, a mounting shroud as well as a motor that is located near the radiator to cool hot coolant before it is circulated within the engine again. Some of the Honda Odyssey models have Mechanical and Electric cooling fan assembly. The mechanical fans are directly connected to crankshaft and work at low speeds and disengaged at higher speeds to prevent excessive noise and fuel consumption where as electric fans are run on 12V motor and it is engaged according to the temperature of the coolant and loading of air conditioning system. The electric version is generally standard for contemporary Odysseys and functions to cool or heat, depending upon the temperature inputs detected by the PCM. Both types incorporate shrouds to channel air an effectively across the radiators.

In search of affordable OEM Honda Odyssey Cooling Fan Assembly? Consider browsing through our extensive inventory of genuine Honda Odyssey Cooling Fan Assembly. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Odyssey Cooling Fan Assembly Parts Questions & Experts Answers

Fan, Cooling
19020-P8F-A01
Q: How to check and replace the cooling fan assembly if it is faulty for the Honda Odyssey?
A: All models have two complete fan circuits - one for the condenser and one for the radiator. If the engine is overheating and the cooling fan assembly is not activating when the engine temperature is high, first check all fuses. If they are intact, unplug the fan motor electrical connector. To test either fan motor, disconnect the connector and use jumper wires to power the fan directly from the battery. If the fan doesn't function, replace the motor. Make sure to also test the condenser fan motor. If the radiator fan motor is working, but not activating when the engine heats up, it might be a relay issue. Locate the fan relays in the engine compartment fuse/relay box. Test the relay, and if they're functioning, test the radiator fan switches. These switches, based on engine temperature, control the fan operations. They can be checked using an ohmmeter. If all components are operational, inspect all wiring and connections to the fan motors. For replacement on models from 2004 and before: Disconnect the cable from the negative battery terminal. Secure the vehicle, raise the front, and remove the lower splash pan from beneath the radiator. Take off the radiator cover, drain the cooling system, and if the coolant is still good, it can be reused. Remove the wiring harness clamp, vacuum hose, and radiator bracket. Extract the battery and battery tray, and disconnect the fan wiring connectors. Remove both the upper and lower radiator hoses. Disconnect the automatic transaxle hoses from the radiator. Remove the radiator and condenser brackets. For 2005 and later models: Disconnect the breather hose and air intake duct. Remove the battery and tray. Depending on the model year, either remove the grille top cover or the front bumper cover. Disconnect any interfering hoses, wiring, and clamps. Remove the Coolant Reservoir.For all models: Extract the upper bolts and slightly loosen the lower bolts of each fan shroud. Lift the fan(s) from the engine compartment. To separate the fan from the motor, remove the motor shaft nut. To detach the fan motor from the shroud, remove the mounting screws. Installation is the reverse of the removal process. Lastly, reconnect the battery.