How do you replace Headlight bulbs on Honda Fit?

To replace halogen bulbs, it is not necessary to remove the headlight housing. For 2008 and earlier models, start by removing the inner fender splash shield on the side where the bulb is being changed. Disconnect the electrical connector and remove the rubber dust cap. The retaining spring has a small handle that needs to be pushed down and inward to release it from the notch. After moving the retaining spring aside, remove the bulb, taking care not to touch the bulb surface with your fingers, as oil can cause it to overheat and fail; if touched, clean it with rubbing alcohol. Installation follows the reverse order. For 2009 and later models, raise the hood and disconnect the electrical connector at the back of the headlight housing, then remove the rubber dust cover. Move the retaining spring aside and take out the bulb, ensuring the notch in the bulb base is aligned when reinstalling the retaining spring. Again, installation is the reverse of removal.

Genuine Honda Fit Headlight Bulb

Headlamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Headlight Bulbs found

View related parts
Honda Fit Bulb (H11) (12V 55W) (Koito)
Part Number: 33165-SAA-003
$18.60 MSRP: $26.27
You Save: $7.67 (30%)
ADD TO CART
Product Specifications
- Other Name: Low Beam Bulb; Fog Lamp Bulb, Headlamp Bulb, Lower Beam Bulb
- Replaces: 33165-S5A-003
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2007-2013 Honda Fit | 5 Door Base, 5 Door FIT, 5 Door Sport | KA 5AT, KA 5MT
View related parts
Honda Fit Bulb, Headlight (Hb2)
Part Number: 33111-SR3-A01
$21.35 MSRP: $30.15
You Save: $8.80 (30%)
ADD TO CART
Product Specifications
- Other Name: Exterior Bulbs; Bulb, Headlamp Bulb
- Replaced by: 33115-TY0-003
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2015-2020 Honda Fit | 5 Door EX, 5 Door EX-L, 5 Door EX-LN, 5 Door LX, 5 Door LX SE, 5 Door Sport | KA 6MT, KA CVT
- 2009-2013 Honda Fit | 5 Door FIT, 5 Door Sport | KA 5AT, KA 5MT
View related parts
Honda Fit Bulb, Wedge (12V 21W) (Amber)
Part Number: 33303-SCK-003
$5.78 MSRP: $8.17
You Save: $2.39 (30%)
ADD TO CART
Product Specifications
- Other Name: Marker Lamp Bulb
- Replaces: 33303-S2R-003
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2007-2013 Honda Fit | 5 Door Base, 5 Door FIT, 5 Door Sport | KA 5AT, KA 5MT
View related parts
Honda Fit Bulb, Headlight (Hb2) (12V 60/55W)
Part Number: 33115-SJC-A01
$13.61 MSRP: $19.21
You Save: $5.60 (30%)
ADD TO CART
Product Specifications
- Other Name: Headlamp Bulb
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2007-2008 Honda Fit | 5 Door Base, 5 Door Sport | KA 5AT, KA 5MT
View related parts
Honda Fit Bulb,Head Light
Part Number: 33115-TY0-003
$21.35 MSRP: $30.15
You Save: $8.80 (30%)
ADD TO CART
Product Specifications
- Other Name: Headlamp Bulb; Bulb, Exterior Bulb
- Replaces: 33115-SM4-003, 33111-SR3-A11, 33115-SM3-003, 33111-S5P-A01, 33115-SV4-003, 33115-SV4-G01, 33111-SR3-A01, 33115-S04-G11, 33115-692-741, 33115-S04-G02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2015-2020 Honda Fit | 5 Door EX, 5 Door EX-L, 5 Door EX-LN, 5 Door LX, 5 Door LX SE, 5 Door Sport | KA 6MT, KA CVT
- 2009-2013 Honda Fit | 5 Door FIT, 5 Door Sport | KA 5AT, KA 5MT

Honda Fit Headlight Bulb Parts Questions & Experts Answers

Bulb, Headlight (Hb2) (12V 60/55W)
33115-SJC-A01
Q: How do you replace Headlight bulbs on Honda Fit?
A: To replace halogen bulbs, it is not necessary to remove the Headlight housing. For 2008 and earlier models, start by removing the inner fender splash shield on the side where the bulb is being changed. Disconnect the electrical connector and remove the rubber dust cap. The retaining spring has a small handle that needs to be pushed down and inward to release it from the notch. After moving the retaining spring aside, remove the bulb, taking care not to touch the bulb surface with your fingers, as oil can cause it to overheat and fail; if touched, clean it with rubbing alcohol. Installation follows the reverse order. For 2009 and later models, raise the hood and disconnect the electrical connector at the back of the headlight housing, then remove the rubber dust cover. Move the retaining spring aside and take out the bulb, ensuring the notch in the bulb base is aligned when reinstalling the retaining spring. Again, installation is the reverse of removal.