Q: What precautions should be taken when removing the door trim panel to avoid damage to the soft plastic interior parts on Honda Fit?
A: Plastic trim tools must be used on all operations to avoid damage to the soft plastic interior parts. This procedure is the same for the front or rear doors. Begin by opening the door and lowering the window. Next, remove the screw securing the inner Door Handle and take off the cover. Then, pry out the front bottom edge of the door pull cover while pushing up the hooks to remove it. Carefully pry up the power window switch and disconnect the power window switch connector. Use a door panel removal tool to take off the door trim panel, starting at the bottom edge and working around the perimeter until all fasteners are released. Pull the door panel upward to remove it. For access to the door outside handle or the door Window Regulator, raise the window fully and carefully peel back the plastic watershield. Installation is the reverse of removal.