How do you properly remove and inspect a stabilizer bar on Honda Del Sol?

It is possible to start by engaging the parking brake and then removing the lug nuts of the front wheel. Lift the front of the vehicle and then set it on jackstands afterward then remove the wheels. Then with the help of a wrench loosen the bolts which hold the sway bar kit bracket to the under side of the car. Remove the nut and bolt of the sway bar link bolts to the lower control arms then take out the sway bar link assembly while noting the spacers washers and the bushing on the link bolt. After that, the bar has to be withdrawn under the vehicle; Take out both ends of the brackets on the sway bar kit and ensure that the bushings are not cracked, hardened or in any way damaged; if they are scrap them. Last but not least, it is tried to reestablish all, hoping for the setup's success in spite of all the occurred during its removal.

Genuine Honda Del Sol Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Sway Bar Kits found

View related parts
Honda Del Sol Spring, Rear Stabilizer (15Mm)
Part Number: 52300-SR3-901
Product Specifications
- Other Name: Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1994-1997 Honda Del Sol | 2 Door V-TEC | KA 5MT, KL 5MT
View related parts
Honda Del Sol Spring, Rear Stabilizer (13Mm)
Part Number: 52300-SR3-A01
Product Specifications
- Other Name: Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1996-1997 Honda Del Sol | 2 Door SI | KA 4AT, KA 5MT
View related parts
Honda Del Sol Spring, Front Stabilizer (21Mm) (Nippon Hatsujo)
Part Number: 51300-SR3-013
Product Specifications
- Other Name: Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1994-1997 Honda Del Sol | 2 Door S, 2 Door SI | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Del Sol Spring, Front Stabilizer (24Mm)
Part Number: 51300-ST7-003
Product Specifications
- Other Name: Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1994-1997 Honda Del Sol | 2 Door V-TEC | KA 5MT, KL 5MT
View related parts
Honda Del Sol Spring, Front Stabilizer (22Mm)
Part Number: 51300-SR3-N02
Product Specifications
- Other Name: Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1996-1997 Honda Del Sol | 2 Door SI | KA 4AT, KA 5MT
- 1993 Honda Del Sol | 2 Door SI | KA 4AT, KA 5MT, KL 4AT, KL 5MT

Honda Del Sol Sway Bar Kit Parts Questions & Experts Answers

Spring, Rear Stabilizer (15Mm)
52300-SR3-901
Q: How do you properly remove and inspect a stabilizer bar on Honda Del Sol?
A: It is possible to start by engaging the parking brake and then removing the lug nuts of the front wheel. Lift the front of the vehicle and then set it on jackstands afterward then remove the wheels. Then with the help of a wrench loosen the bolts which hold the sway bar kit bracket to the under side of the car. Remove the nut and bolt of the sway bar link bolts to the lower Control Arms then take out the sway bar link assembly while noting the spacers washers and the bushing on the link bolt. After that, the bar has to be withdrawn under the vehicle; Take out both ends of the brackets on the sway bar kit and ensure that the bushings are not cracked, hardened or in any way damaged; if they are scrap them. Last but not least, it is tried to reestablish all, hoping for the setup's success in spite of all the occurred during its removal.