How Do You Remove and Assemble a Brake Drum,Brake Shoe and Wheel Cylinder on Honda CRX?

To remove the drum, lift the vehicle, remove the rear wheel and tire, and then the drum. Check the drum for cracks and the shoe for wear. To remove the shoes, lift the vehicle, remove the wheel, tire, and brake drums, remove the pins, lower the brake shoe assembly, disconnect the parking brake cable, remove the upper return spring, self-adjuster lever, and spring, and separate the shoes. To remove the wheel cylinder, lift the vehicle, remove the tire, wheel, brake drum, and shoes, disconnect the parking brake cable and brake lines, and remove the wheel cylinder. When reassembling, grease the wheel cylinder piston grooves and backing plate surfaces, and apply brake fluid to the pistons, piston cup, and cylinder walls.

Genuine Honda CRX Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wheel Cylinders found

View related parts
Honda CRX Cylinder Assembly, Left Rear Wheel
Part Number: 43301-S04-003
$42.47 MSRP: $59.98
You Save: $17.51 (30%)
ADD TO CART
Product Specifications
- Other Name: Wheel Cylinder
- Position: Rear Driver Side
- Replaces: 43301-SR3-003, 43301-SH3-J01, 43301-SM4-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1990-1991 Honda CRX | 2 Door DX, 2 Door HF | KA 4AT, KA 5MT, KH 5MT, KL 4AT, KL 5MT
View related parts
Honda CRX Cylinder Assembly, Right Rear Wheel
Part Number: 43300-S04-003
$42.47 MSRP: $59.98
You Save: $17.51 (30%)
ADD TO CART
Product Specifications
- Other Name: Wheel Cylinder
- Position: Rear Passenger Side
- Replaces: 43300-SR3-003, 43300-SH3-J01, 43300-SM4-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1990-1991 Honda CRX | 2 Door DX, 2 Door HF | KA 4AT, KA 5MT, KH 5MT, KL 4AT, KL 5MT
View related parts
Honda CRX Cylinder Assembly, Right Rear Wheel
Part Number: 43300-SB2-003
Product Specifications
- Other Name: Wheel Cylinder
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1984-1989 Honda CRX | 2 Door DX, 2 Door HF, 2 Door SI | KA 3AT, KA 4AT, KA 5MT, KH 5MT, KL 3AT, KL 4AT, KL 5MT
View related parts
Honda CRX Cylinder Assembly, Left Rear Wheel
Part Number: 43301-SB2-003
Product Specifications
- Other Name: Wheel Cylinder
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1984-1989 Honda CRX | 2 Door DX, 2 Door HF, 2 Door SI | KA 3AT, KA 4AT, KA 5MT, KH 5MT, KL 3AT, KL 4AT, KL 5MT

Honda CRX Wheel Cylinder

The Wheel Cylinder in Honda CRX employs force on the brake shoes so that they can rub on the brake drum and help in the braking of the automobile. This hydraulic system is a cylinder with pistons and rubber seal that in effect, protrude on the brake shoe side when the brake pressure is applied. Wheel cylinder is normally made from Aluminum so that it cannot get rusty and can serve its purpose for the longest time. This is a good time also to change or even reconstruct the wheel cylinder in order to ensure safe and effective brake system as required on the roads. To avoid problems such as a decrease in brake force, or brake drag, Wheel cylinder maintenance should be checked frequently and taken to a mechanic for repair if needed.

In search of affordable OEM Honda CRX Wheel Cylinder? Consider browsing through our extensive inventory of genuine Honda CRX Wheel Cylinder. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda CRX Wheel Cylinder Parts Questions & Experts Answers

Cylinder Assembly, Right Rear Wheel
43300-S04-003
Q: How Do You Remove and Assemble a Brake Drum,Brake Shoe and Wheel Cylinder on Honda CRX?
A: To remove the drum, lift the vehicle, remove the rear wheel and tire, and then the drum. Check the drum for cracks and the shoe for wear. To remove the shoes, lift the vehicle, remove the wheel, tire, and brake drums, remove the pins, lower the brake shoe assembly, disconnect the parking brake cable, remove the upper return spring, self-adjuster lever, and spring, and separate the shoes. To remove the wheel cylinder, lift the vehicle, remove the tire, wheel, brake drum, and shoes, disconnect the parking brake cable and brake lines, and remove the wheel cylinder. When reassembling, grease the wheel cylinder piston grooves and backing plate surfaces, and apply brake fluid to the pistons, piston cup, and cylinder walls.