How Do You Remove and Assemble a Brake Drum,Brake Shoe and Wheel Cylinder on Honda CRX?

To remove the drum, lift the vehicle, remove the rear wheel and tire, and then the drum. Check the drum for cracks and the shoe for wear. To remove the shoes, lift the vehicle, remove the wheel, tire, and brake drums, remove the pins, lower the brake shoe assembly, disconnect the parking brake cable, remove the upper return spring, self-adjuster lever, and spring, and separate the shoes. To remove the wheel cylinder, lift the vehicle, remove the tire, wheel, brake drum, and shoes, disconnect the parking brake cable and brake lines, and remove the wheel cylinder. When reassembling, grease the wheel cylinder piston grooves and backing plate surfaces, and apply brake fluid to the pistons, piston cup, and cylinder walls.

Genuine Honda CRX Brake Shoe Set

Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Shoe Sets found

View related parts
Honda CRX Shoe, Rear Brake
Part Number: 43153-SH3-517
Product Specifications
- Position: Rear
- Replaced by: 43153-SH3-315
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1984-1991 Honda CRX | 2 Door DX, 2 Door HF, 2 Door SI | KA 3AT, KA 4AT, KA 5MT, KH 5MT, KL 3AT, KL 4AT, KL 5MT
View related parts
Honda CRX Shoe Kit, Brake
Part Number: 064B3-SB2-601
Product Specifications
- Replaced by: 43053-SB2-506
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1984-1987 Honda CRX | 2 Door DX, 2 Door HF, 2 Door SI | KA 3AT, KA 4AT, KA 5MT, KH 5MT, KL 3AT, KL 4AT, KL 5MT
View related parts
Honda CRX Shoe Complete Rear Br
Part Number: 43153-SH3-305
Product Specifications
- Other Name: Rear Shoes
- Position: Rear
- Replaced by: 43153-SH3-315
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1984-1991 Honda CRX | 2 Door DX, 2 Door HF, 2 Door SI | KA 3AT, KA 4AT, KA 5MT, KH 5MT, KL 3AT, KL 4AT, KL 5MT

Honda CRX Brake Shoe Set

The Brake Shoe Set is used in drum brake system of Honda CRX vehicles and provides necessary friction to practically apply the brakes. When the brakes are applied, the shoes rub against the interior periphery of the drum and hence slows down movement through friction. This mechanism is very important to total braking capability particularly at the rear wheels where using drum brakes is normal. Honda CRX models of the years were using the two variants of brake shoe sets, the non-servo as well as the duo-servo. Although both are auto or self energised, duo-servo brakes do provide better stopping power due to this design which enables the rotating drum to pull the shoe closer against the drum. These are essential because over time, the linings of the Brake Shoe Set can wear out and this hence hinder safe braking.

In search of affordable OEM Honda CRX Brake Shoe Set? Consider browsing through our extensive inventory of genuine Honda CRX Brake Shoe Set. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda CRX Brake Shoe Set Parts Questions & Experts Answers

Shoe Kit, Brake
064B3-SB2-601
Q: How Do You Remove and Assemble a Brake Drum,Brake Shoe and Wheel Cylinder on Honda CRX?
A: To remove the drum, lift the vehicle, remove the rear wheel and tire, and then the drum. Check the drum for cracks and the shoe for wear. To remove the shoes, lift the vehicle, remove the wheel, tire, and brake drums, remove the pins, lower the brake shoe assembly, disconnect the parking brake cable, remove the upper return spring, self-adjuster lever, and spring, and separate the shoes. To remove the wheel cylinder, lift the vehicle, remove the tire, wheel, brake drum, and shoes, disconnect the parking brake cable and brake lines, and remove the wheel cylinder. When reassembling, grease the wheel cylinder piston grooves and backing plate surfaces, and apply brake fluid to the pistons, piston cup, and cylinder walls.