How Do I Replace the Thermostat in My Honda Crosstour?

Check coolant level, drivebelt tension and temperature gauge. Replace thermostat if engine takes long to warm up. If engine runs hot, disconnect battery, remove battery and air filter housing, drain cooling system, locate thermostat housing cover, remove quick connect fitting or loosen hose clamp, take note of thermostat installation, remove thermostat housing cover bolts and cover, remove old seal, install new seal or O-ring, install thermostat, install thermostat housing cover, reattach hose and tighten hose clamp, refill cooling system, reconnect battery, start engine and allow to reach normal operating temperature, check for leaks and proper thermostat operation.

Genuine Honda Crosstour Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Thermostats found

View related parts
Honda Crosstour Thermostat Assembly (Nippon Thermostat)
Part Number: 19301-P8E-A10
$71.82 MSRP: $104.08
You Save: $32.26 (31%)
ADD TO CART
Product Specifications
- Other Name: Thermostat
- Replaces: 19301-PR7-A01, 19301-PR7-307, 19301-PR7-A00, 19300-PR7-A02, 19300-PR7-A01, 19301-PR7-306, 19301-PR7-305
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2012 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 5AT
View related parts
Honda Crosstour Thermostat Assembly (Nippon Thermostat)
Part Number: 19301-R40-A02
$79.15 MSRP: $111.80
You Save: $32.65 (30%)
ADD TO CART
Product Specifications
- Other Name: Thermostat; Thermostat Unit
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2012-2015 Honda Crosstour | 5 Door EX, 5 Door EX-L | KA 5AT
View related parts
Honda Crosstour Cover Assembly, Thermo
Part Number: 19315-5G0-A01
$50.73 MSRP: $71.65
You Save: $20.92 (30%)
ADD TO CART
Product Specifications
- Other Name: Thermostat Housing
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2015 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 6AT

Honda Crosstour Thermostat

The internal part of the Honda Crosstour that is specifically referred to as the Thermostat is usually positioned close to the radiator. Its major roles include managing the temperature of the engine with a view to improving on its performance. Thermostats are fixed-potential controllers that measure a temperature set point; essential in residential and industrial uses. Mechanical controllers that have been used in the past include bimetallic strips and wax pellets while the pneumatic controllers have also served a purpose in the past. These devices function basically through turning on/off the heating or cooling systems or by controlling the circulation of the heat exchanging fluids; this results in more comfort and operational efficiency of the vehicle.

In search of affordable OEM Honda Crosstour Thermostat? Consider browsing through our extensive inventory of genuine Honda Crosstour Thermostat. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Crosstour Thermostat Parts Questions & Experts Answers

Thermostat Assembly (Nippon Thermostat)
19301-R40-A02
Q: How Do I Replace the Thermostat in My Honda Crosstour?
A:
Check coolant level, drivebelt tension and temperature gauge. Replace thermostat if engine takes long to warm up. If engine runs hot, disconnect battery, remove battery and air filter housing, drain cooling system, locate thermostat housing cover, remove quick connect fitting or loosen hose clamp, take note of thermostat installation, remove thermostat housing cover bolts and cover, remove old seal, install new seal or O-ring, install thermostat, install thermostat housing cover, reattach hose and tighten hose clamp, refill cooling system, reconnect battery, start engine and allow to reach normal operating temperature, check for leaks and proper thermostat operation.