How to remove and install the Ignition Lock Cylinder and Ignition Switch on a Honda Crosstour?

Remove the dashboard lower cover and the steering column covers. Disconnect the electrical connector from the ignition switch/Ignition Lock Cylinder assembly by depressing the release tab and pulling out the connector. Center-punch the shear bolts that attach the ignition switch/Ignition Lock Cylinder assembly clamp to the steering column, then drill a hole in both bolts and unscrew them with a screw extractor to remove the clamp and the ignition switch/Ignition Lock Cylinder assembly. Install the new ignition switch/Ignition Lock Cylinder assembly on the steering column without the ignition key inserted, then install the mounting clamp and new shear bolts without tightening them yet. Insert the ignition key to verify that it turns freely and that the steering wheel lock functions correctly. Once confirmed, tighten the two shear bolts until the hex heads twist off. The installation process is the reverse of removal.

Genuine Honda Crosstour Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Ignition Lock Cylinders found

View related parts
Honda Crosstour Steering Lock Assembly
Part Number: 06351-TE0-A11
$318.38 MSRP: $453.52
You Save: $135.14 (30%)
ADD TO CART
Product Specifications
- Other Name: Ignition Lock Cylinder; Steering Lock
- Replaced by:
- Replaces: 06351-TA0-H11, 06351-TP5-H11
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2012 Honda Crosstour | 5 Door EX, 5 Door EX (2WD), 5 Door EX-L, 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 5AT
View related parts
Honda Crosstour Lock Assy,Steerin
Part Number: 06351-T2A-A11
$647.45 MSRP: $934.26
You Save: $286.81 (31%)
ADD TO CART
Product Specifications
- Other Name: Ignition Lock Cylinder; Steering Lock
- Replaced by:
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2014 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 6AT
View related parts
Honda Crosstour Lock Assy.,Steering
Part Number: 06351-T2A-971
$475.25 MSRP: $685.78
You Save: $210.53 (31%)
ADD TO CART
Product Specifications
- Other Name: Ignition Lock Cylinder; Steering Lock
- Replaced by:
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2015 Honda Crosstour | 5 Door EX, 5 Door EX-L | KA 5AT
View related parts
Honda Crosstour Key Cylinder Set
Part Number: 06350-TP6-A11
$552.11 MSRP: $796.70
You Save: $244.59 (31%)
ADD TO CART
Product Specifications
- Other Name: Steering Lock
- Replaced by:
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2011 Honda Crosstour | 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 5AT
View related parts
Honda Crosstour Key Cylinder Set
Part Number: 06350-TP6-A31
$471.91 MSRP: $680.97
You Save: $209.06 (31%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Set, Key
- Replaced by:
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2012 Honda Crosstour | 5 Door EX-L, 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 5AT
View related parts
Honda Crosstour Steering Lock Assembly
Part Number: 06351-T2A-H01
$511.12 MSRP: $737.54
You Save: $226.42 (31%)
ADD TO CART
Product Specifications
- Other Name: Ignition Lock Cylinder; Steering Lock
- Replaced by:
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2014-2015 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 6AT
View related parts
Honda Crosstour Cylinder Set,Key
Part Number: 06350-TY4-A02
$551.93 MSRP: $796.45
You Save: $244.52 (31%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Set,Key
- Replaced by:
- Replaces: 06350-TY4-A01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2015 Honda Crosstour | 5 Door EX | KA 5AT
View related parts
Honda Crosstour Key Cylinder Set
Part Number: 06350-TY4-A01
$551.93 MSRP: $796.45
You Save: $244.52 (31%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Set, Key
- Replaced by: 06350-TY4-A02
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013 Honda Crosstour | 5 Door EX | KA 5AT
View related parts
Honda Crosstour Cylinder Set,Key
Part Number: 06350-TY4-A12
$558.62 MSRP: $806.09
You Save: $247.47 (31%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Set,Key
- Replaced by:
- Replaces: 06350-TY4-A11
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2015 Honda Crosstour | 5 Door EX-L | KA 5AT
View related parts
Honda Crosstour Key Cylinder Set
Part Number: 06350-TP6-A01
$532.88 MSRP: $752.66
You Save: $219.78 (30%)
ADD TO CART
Product Specifications
- Other Name: Steering Lock
- Replaced by:
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2011 Honda Crosstour | 5 Door EX (2WD) | KA 5AT
View related parts
Honda Crosstour Key Cylinder Set
Part Number: 06350-TP6-A51
$173.34 MSRP: $246.92
You Save: $73.58 (30%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Set, Key
- Replaced by:
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2015 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 6AT
View related parts
Honda Crosstour Key Cylinder Set
Part Number: 06350-TP6-A21
Product Specifications
- Other Name: Cylinder Set, Key
- Replaced by:
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2012 Honda Crosstour | 5 Door EX, 5 Door EX (2WD) | KA 5AT

Honda Crosstour Ignition Lock Cylinder

The Ignition Lock Cylinder in Honda Crosstour is a very useful part of the car that enables a driver to put in a key and turn it to start the car's engine. This mechanism is incorporated in the ignition switch system and this switches battery power to the required circuits every time the key is turned to the START position. This is done to ensure that only a goven key can open the intended vehicle hence improving on the security aspect of the design. In years past, Crosstour models had key-start ignition systems but the inventions of the years have transformed these systems into more selective keyless ignition systems. The old key ignition lock cylinder has the problem of wear as a mechanism and can even fail, whereas, the keyless versions are more reliable and less cumbersome since they work on an received signal from a fob and the car's computer. However, the advancement in car technology especially in how the locks operate has not made the Ignition Lock Cylinder obsolete in the Honda Crosstour cars as it plays a significant role in the security and performance of the car.

In search of affordable OEM Honda Crosstour Ignition Lock Cylinder? Consider browsing through our extensive inventory of genuine Honda Crosstour Ignition Lock Cylinder. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Crosstour Ignition Lock Cylinder Parts Questions & Experts Answers

Steering Lock Assembly
06351-TE0-A11
Q:
How to remove and install the Ignition Lock Cylinder and Ignition Switch on a Honda Crosstour?
A:
Remove the dashboard lower cover and the steering column covers. Disconnect the electrical connector from the ignition switch/Ignition Lock Cylinder assembly by depressing the release tab and pulling out the connector. Center-punch the shear bolts that attach the ignition switch/Ignition Lock Cylinder assembly clamp to the steering column, then drill a hole in both bolts and unscrew them with a screw extractor to remove the clamp and the ignition switch/Ignition Lock Cylinder assembly. Install the new ignition switch/Ignition Lock Cylinder assembly on the steering column without the ignition key inserted, then install the mounting clamp and new shear bolts without tightening them yet. Insert the ignition key to verify that it turns freely and that the steering wheel lock functions correctly. Once confirmed, tighten the two shear bolts until the hex heads twist off. The installation process is the reverse of removal.

Related Honda Crosstour Parts

Browse by Year

2015 Ignition Lock Cylinder 2014 Ignition Lock Cylinder 2013 Ignition Lock Cylinder 2012 Ignition Lock Cylinder 2011 Ignition Lock Cylinder 2010 Ignition Lock Cylinder