How to replace the EGR Valve on Honda Crosstour?

NOx are reduced by the EGR system. On four-cylinder models, the EGR valve is located at the left end of the cylinder head. To replace, disconnect the electrical connector and remove the mounting nuts, then discard the old gasket. Installation is the reverse of removal, and the mounting nuts should be tightened to the torque listed in the specs.

Genuine Honda Crosstour EGR Valve

Emissions EGR Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 EGR Valves found

View related parts
Honda Crosstour Valve Set, EGR
Part Number: 18011-R70-A00
$151.60 MSRP: $215.96
You Save: $64.36 (30%)
ADD TO CART
Product Specifications
- Other Name: EGR Valve
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2010-2012 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 5AT
View related parts
Honda Crosstour Valve Set, EGR
Part Number: 18011-R1A-A00
$183.39 MSRP: $261.24
You Save: $77.85 (30%)
ADD TO CART
Product Specifications
- Other Name: EGR Valve
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2013-2015 Honda Crosstour | 5 Door EX (2WD), 5 Door EX-L (2WD), 5 Door EX-L (4WD) | KA 6AT

Honda Crosstour EGR Valve

The EGR Valve is found in Honda Crosstour vehicles and is responsible for regulating the exhaust gases in the engine so that air pollutants are deem when the wanted air-fuel ratio is not sustained. This technique aids in reducing the amount of NOx emission by recirculating the exhaust gas effectively reducing the combustion temperature thereby limiting the formation of NOx. Developing from simple orifice jets at its inception up to today's engines, EGR technology has evolved to comprehensively controlled valves based on engine conditions, with some of the current strategies chaining the amount of EGR flow dependent on engine load. While EGR is efficient in handling the emissions issue some of today's engines such as the Chrysler Pentastar 3.6 does not incorporate EGR. Daily or frequent cleaning is needed to avoid blockage of carbon in the EGR valve.

In search of affordable OEM Honda Crosstour EGR Valve? Consider browsing through our extensive inventory of genuine Honda Crosstour EGR Valve. Not only do we provide market-leading prices and a manufacturer's warranty, but we also pride ourselves on exceptional customer service and swift delivery.

Honda Crosstour EGR Valve Parts Questions & Experts Answers

Valve Set, EGR
18011-R1A-A00
Q: How to replace the EGR Valve on Honda Crosstour?
A: NOx are reduced by the EGR system. On four-cylinder models, the EGR valve is located at the left end of the cylinder head. To replace, disconnect the electrical connector and remove the mounting nuts, then discard the old gasket. Installation is the reverse of removal, and the mounting nuts should be tightened to the torque listed in the specs.