How do you disconnect and replace the ignition switch and key lock cylinder on Honda Civic?

Disconnect the cable from the negative battery terminal and wait at least three minutes before proceeding. Remove the driver's dashboard panel assembly and the steering column covers. For the ignition switch (key type), disconnect the electrical connector from the ignition switch by pulling the release tab, then remove the ignition switch mounting screws and the switch itself. Installation is the reverse of removal, ensuring to reconnect the cable to the negative battery terminal and verify the ignition switch operates correctly in all positions. If replacing the Ignition Lock Cylinder, the immobilizer and transmitter must be reprogrammed using the factory scan tool at a dealer service department or qualified repair facility. Disconnect the negative battery terminal and wait at least three minutes before continuing. Remove the steering column covers and dashboard panels, then disconnect the ignition switch electrical connector along with the connectors for the Ignition Lock Cylinder, immobilizer control unit/receiver, and Ignition Lock Cylinder/key light. Remove the ignition switch and the immobilizer unit by disconnecting the immobilizer connector and carefully lifting the tabs. Center-punch the shear-head bolts securing the Ignition Lock Cylinder housing to the steering column, drill holes in the center of each bolt with a 3/16-inch drill bit, and unscrew them with a screw extractor. Remove the Ignition Lock Cylinder assembly from the steering column, verify the steering wheel lock mechanism functions correctly with the ignition key, and tighten the new shear-head bolts until the heads break off. For the ignition switch (push button start system), disconnect the negative battery terminal and wait at least three minutes before proceeding. Remove the driver's side dash vent trim, dash center pocket, audio/navigation unit, and lower dash trim panels, then remove the instrument cluster display trim panel and disconnect the electrical connector to the ignition push button switch. Turn the instrument cluster display trim cover and remove the screws securing the ignition push button switch to the trim cover, with installation being the reverse of removal.

Genuine Honda Civic Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Ignition Switches found

View related parts
Honda Civic Switch, Steering
Part Number: 35130-SAA-J51
$73.64 MSRP: $104.01
You Save: $30.37 (30%)
ADD TO CART
Product Specifications
- Other Name: Ignition Switch; Switch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2011 Honda Civic | 2 Door DX, 2 Door EX, 2 Door EX-L, 2 Door LX, 2 Door SI, 4 Door DX, 4 Door EX, 4 Door EX-L, 4 Door GX, 4 Door LX, 4 Door LX-S, 4 Door SI | KA 5AT, KA 5MT, KA 6MT
View related parts
Honda Civic Switch, Steering
Part Number: 35130-TR0-A01
$58.86 MSRP: $83.13
You Save: $24.27 (30%)
ADD TO CART
Product Specifications
- Other Name: Ignition Switch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2012-2021 Honda Civic | 2 Door DX, 2 Door EX, 2 Door EX-L, 2 Door LX, 2 Door LX (6MT), 2 Door LX (CVT), 2 Door SI, 4 Door DX, 4 Door EX, 4 Door EX-L, 4 Door GX, 4 Door HF, 4 Door LX, 4 Door LX (6MT), 4 Door LX (AT), 4 Door LX (CVT), 4 Door LX-A, 4 Door SE, 4 Door SI | KA 5AT, KA 5MT, KA 6MT, KA CVT, KL 5AT, KL CVT
View related parts
Honda Civic Switch Assembly, Start Sto
Part Number: 35881-TBA-A01
$24.86 MSRP: $35.12
You Save: $10.26 (30%)
ADD TO CART
Product Specifications
- Other Name: Start Button; Power Switch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2016-2021 Honda Civic | 2 Door EX, 2 Door EX (Turbo), 2 Door EX (Turbo/6MT), 2 Door EX (Turbo/CVT), 2 Door LX (CVT), 2 Door SI, 2 Door Sport, 2 Door Sport (6MT), 2 Door Sport (CVT), 2 Door Touring, 2 Door Touring (Turbo), 4 Door EX, 4 Door EX (Turbo), 4 Door EX-A, 4 Door EX-T, 4 Door EX-TA, 4 Door EX-TL, 4 Door EX-TLA, 4 Door SI, 4 Door Sport, 4 Door Sport (6MT), 4 Door Sport (CVT), 4 Door Touring, 4 Door Touring (Turbo), 5 Door EX, 5 Door EX-L, 5 Door SE, 5 Door Sport, 5 Door Touring LE, 5 Door Type R, 5 Door Type R (Touring) | KA 6MT, KA CVT, KL CVT
View related parts
Honda Civic Switch Assembly, Engine Start & Stop
Part Number: 35881-TR0-D02
$151.18 MSRP: $215.35
You Save: $64.17 (30%)
ADD TO CART
Product Specifications
- Other Name: Power Switch; Start Button
- Replaces: 35881-TR0-D01
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2014-2015 Honda Civic | 2 Door EX, 2 Door EX-L, 2 Door SI, 4 Door EX, 4 Door EX-L, 4 Door MX, 4 Door MX (Hybrid), 4 Door SI | KA 5MT, KA 6MT, KA CVT, KL CVT
View related parts
Honda Civic Switch, Steering
Part Number: 35130-S5A-J51
$59.40 MSRP: $83.90
You Save: $24.50 (30%)
ADD TO CART
Product Specifications
- Other Name: Ignition Switch; Switch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2001-2005 Honda Civic | 2 Door DX, 2 Door EX, 2 Door HX, 2 Door LX, 3 Door SI, 4 Door DX, 4 Door DX-VP, 4 Door EX, 4 Door GX, 4 Door LX, 4 Door LX-CAR, 4 Door MX (Hybrid) | KA 4AT, KA 5MT, KA CVT, KL 4AT, KL 5MT, KL CVT
View related parts
Honda Civic Switch, Steering
Part Number: 35130-S02-E01
$96.45 MSRP: $136.24
You Save: $39.79 (30%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1998-2000 Honda Civic | 2 Door DX, 2 Door EX, 2 Door HX, 2 Door SI, 3 Door CX, 3 Door DX, 4 Door DX, 4 Door DX-VP, 4 Door EX, 4 Door GX, 4 Door LX | KA 4AT, KA 5MT, KA CVT, KL 5MT, KL CVT
View related parts
Honda Civic Switch, Steering
Part Number: 35130-SJA-A01
$73.87 MSRP: $104.33
You Save: $30.46 (30%)
ADD TO CART
Product Specifications
- Other Name: Ignition Switch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2006-2011 Honda Civic | 4 Door MX (Hybrid) | KA CVT
View related parts
Honda Civic Lock Assembly, Steering Lock
Part Number: 35100-SB3-682
$211.98 MSRP: $307.23
You Save: $95.25 (31%)
ADD TO CART
Product Specifications
- Other Name: Ignition Switch; Lock Assembly
- Replaces: 35100-SB3-681
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1985-1987 Honda Civic | 3 Door (1300), 3 Door DX, 3 Door S, 3 Door SI, 4 Door GL | KA 3AT, KA 4AT, KA 4MT, KA 5MT, KH 4MT, KL 3AT, KL 4AT, KL 4MT, KL 5MT
View related parts
Honda Civic SWITCH ASSY
Part Number: 35881-TZA-A01
$24.72 MSRP: $34.92
You Save: $10.20 (30%)
ADD TO CART
Product Specifications
- Other Name: Power Switch, Start Button
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2022-2023 Honda Civic | EX, EX-L, LX, Si, Sport, Sport Touring, Touring, Type R
View related parts
Honda Civic Switch, Steering
Part Number: 35130-T5A-J01
$93.43 MSRP: $131.96
You Save: $38.53 (30%)
ADD TO CART
Product Specifications
- Other Name: Ignition Switch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2017-2021 Honda Civic | 5 Door LX, 5 Door Sport | KA 6MT, KA CVT, KL CVT
- 2013 Honda Civic | 4 Door MX (Hybrid) | KA CVT, KL CVT
View related parts
Honda Civic Switch, Steering
Part Number: 35130-TR0-A11
$62.10 MSRP: $87.71
You Save: $25.61 (30%)
ADD TO CART
Product Specifications
- Other Name: Ignition Switch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 2012-2013 Honda Civic | 4 Door MX (Hybrid) | KA CVT, KL CVT
View related parts
Honda Civic Switch, Steering
Part Number: 35130-SH5-A01
$62.67 MSRP: $88.52
You Save: $25.85 (30%)
ADD TO CART
Product Specifications
- Replaced by: 35130-SH5-505
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1989-1991 Honda Civic | 5 Door (Wagovan), 5 Door 4WD, 5 Door DX | KA 4AT, KA 5MT, KL 4AT, KL 5MT
View related parts
Honda Civic Switch, Steering
Part Number: 35130-SH3-A01
Product Specifications
- Replaced by: 35130-SH5-505
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1988-1991 Honda Civic | 3 Door DX, 3 Door SI, 3 Door STD, 4 Door DX, 4 Door EX, 4 Door LX, 5 Door (Wagovan), 5 Door 4WD, 5 Door DX | KA 4AT, KA 4MT, KA 5MT, KL 4AT, KL 4MT, KL 5MT
View related parts
Honda Civic Switch, Steering Lock
Part Number: 35130-SB2-003
Product Specifications
- Other Name: Ignition Switch; Switch
- Warranty: This genuine part is guaranteed by Honda's factory warranty.
Fits the following Vehicles:
- 1984-1987 Honda Civic | 3 Door (1300), 3 Door DX, 3 Door S, 3 Door SI, 4 Door GL, 5 Door 4WD, 5 Door DX, 5 Door WV | KA 3AT, KA 4AT, KA 4MT, KA 5MT, KH 4MT, KL 3AT, KL 4AT, KL 4MT, KL 5MT

About Honda Civic Ignition Switch

A Honda Civic needs to be kept in good working condition in your vehicle. The online catalog we provide will get you through the ordering process safely and securely. All genuine Honda Ignition Switches from us are shipped directly from authorized Honda Dealer. If you want search for Honda Ignition Switch fast and easily, just come to Hondapartsnow.com to look for your parts.

Honda Civic Ignition Switch Parts Questions & Experts Answers

Switch, Steering
35130-TR0-A01
Q: How do you disconnect and replace the ignition switch and key lock cylinder on Honda Civic?
A: Disconnect the cable from the negative battery terminal and wait at least three minutes before proceeding. Remove the driver's dashboard panel assembly and the steering column covers. For the ignition switch (key type), disconnect the electrical connector from the ignition switch by pulling the release tab, then remove the ignition switch mounting screws and the switch itself. Installation is the reverse of removal, ensuring to reconnect the cable to the negative battery terminal and verify the ignition switch operates correctly in all positions. If replacing the Ignition Lock Cylinder, the immobilizer and transmitter must be reprogrammed using the factory scan tool at a dealer service department or qualified repair facility. Disconnect the negative battery terminal and wait at least three minutes before continuing. Remove the steering column covers and dashboard panels, then disconnect the ignition switch electrical connector along with the connectors for the Ignition Lock Cylinder, immobilizer control unit/receiver, and Ignition Lock Cylinder/key light. Remove the ignition switch and the immobilizer unit by disconnecting the immobilizer connector and carefully lifting the tabs. Center-punch the shear-head bolts securing the Ignition Lock Cylinder housing to the steering column, drill holes in the center of each bolt with a 3/16-inch drill bit, and unscrew them with a screw extractor. Remove the Ignition Lock Cylinder assembly from the steering column, verify the steering wheel lock mechanism functions correctly with the ignition key, and tighten the new shear-head bolts until the heads break off. For the ignition switch (push button start system), disconnect the negative battery terminal and wait at least three minutes before proceeding. Remove the driver's side dash vent trim, dash center pocket, audio/navigation unit, and lower dash trim panels, then remove the instrument cluster display trim panel and disconnect the electrical connector to the ignition push button switch. Turn the instrument cluster display trim cover and remove the screws securing the ignition push button switch to the trim cover, with installation being the reverse of removal.