Honda 17040-SR2-A31 Pump Unit Assembly, Fuel

You can Select Your Vehicle to check if 17040-SR2-A31 fits your vehicle.

Detach the cable from the negative battery terminal and relieve the fuel system pressure. Remove the rear seat and the bolts that retain the fuel pump access cover, then unplug the electrical connector from the fuel pump and detach the fuel lines. Remove the fuel pump assembly retaining nuts and lift the fuel pump from the tank, angling it slightly to avoid damaging the pump screen. Take off the electrical connector protective cover and disconnect the electrical connector from the fuel pump by lifting the tab on the main connector. Squeeze the hose clamps with pliers, removing the upper clamp from the hose and sliding the lower clamp halfway up the hose, off the fuel pump inlet. Separate the pump from the fuel pump bracket and pry off the retaining clip to detach the sock filter from the end of the pump. Installation is the reverse of removal, ensuring a new gasket is used on the cover plate flange.

Check for vacuum at the hose, inspect the fuel filter, and look for any pinched or clogged hoses.